63 results for "Rotary Motion Motor Kit"

• Go Direct Rotary Motion Troubleshooting and FAQs ...

  What are the dimensions of the 3-step pulley/wheel on the Rotary Motion Sensor? With which rotary motion sensors does the Vernier Rotational Motion Accessory Kit (AK-RMV) work? What are the moments of inertia of the disks included in the Rotary Motion Accessory Kit? How do I measure linear position with a GDX-RMS in Graphical Analysis 4?

  https://www.vernier.com/til/4051

• Rotary Motion Sensor Troubleshooting and FAQs - Technical ...

  Attach the Rotary Motion Sensor to the Vernier data-collection interface and start the data-collection software. 2. If you are using LabPro, open the Rotary Motion Angular.cmbl file from the Probes and Sensors folder in Logger Pro .

  https://www.vernier.com/til/1439

• With which rotary motion sensors does the Vernier ...

  The Rotary Motion Accessory Kit works with the Rotary Motion Sensor (RMV-BTD) and the Go Direct ® Rotary Motion Sensor (GDX-RMS).. Everything in the Rotational Motion Accessory Kit (AK-RMV) will work with the older sensors with one important exception. To apply a torque to the 3-step pulley, you need to attach a pulley (ultra-pulley or smart pulley) to the rotary motion sensor.

  https://www.vernier.com/til/1823/

• What are the dimensions of the 3-step pulley/wheel on the ...

  The dimensions and masses are the same for the Standard Rotary Motion Sensor and the Go Direct Rotary Motion Sensor. The measurements are as follows: Diameter of small groove: 10 mm Diameter of medium groove: 29 mm Diameter of large groove: 48 mm Diameter of outer: 52 mm Diameter of outer with rubber O-ring installed: 55 mm

  https://www.vernier.com/til/1012

• Can I buy just the adjustable swivel mount from the Rotary ...

  Yes. The swivel from can be purchased separately as . Learn More About Vernier Products. Our products complement your teaching and help your students engage with key STEM concepts.

  https://www.vernier.com/til/2989

• What are the moments of inertia of the disks included in ...

  The Rotational Motion Accessory Kit (AK-RMV) includes several discs for rotary motion experiments. Both smooth discs have a moment of 1.05 x 10^-4 kg m^2 to three decimal places. The disc with a small hole is 106.1 g, 89.0 mm diameter, 3.6 mm hole. The disc with cork and a larger hole is 105.2 g, 89.0 mm diameter, 6.0 mm hole.

  https://www.vernier.com/til/2732

• Are Vernier and Pasco products compatible? - Technical ...

  Will the Pasco Rotary motion sensor (CI-6538) work on a ULI or LabPro? Can I use the PASCO Free Fall Adapter with the ULI, LabPro, or LabQuest? Does the Pasco Laser Switch (ME-9259A) work with Vernier interfaces? Does the Pasco picket fence work the same as the Vernier picket fence? I have a Vernier product, will it work with PASCO products?

  https://www.vernier.com/til/1449

• What do I need to purchase to do IB Physics? - Technical ...

  Instructors, both SL and HL, planning on including Option B: Rotational Dynamics or Option C: Imaging in their curriculum will find the Rotary Motion Sensor (RMV-BTD) and Rotational Motion Accessory Kit (AK-RMV) and Optics Expansion Kit (OEK) and Mirror Set for Optics Expansion Kit (M-OEK), are perfect for lab investigations for those topics.

  https://www.vernier.com/til/3552

• What do I need to purchase for AP Physics 1 or 2 ...

  Rotary Motion Sensor (RMV-BTD) And, order this required lab equipment: Dynamics Cart and Track System with Motion Encoder (DTS-EC) or Dynamics Cart and Track System (DTS) Springs Set (SPRINGS) Bumper and Launcher Kit (BLK) Friction Pad DTS (DTS-PAD) Rotational Motion Accessory Kit (AK-RMV) Go Direct ® Centripetal Force Apparatus (GDX-CFA)

  https://www.vernier.com/til/3319

• What is the uncertainty of my sensor? - Technical ...

  The uncertainty of a measurement is not defined solely by the instrument of measurement, such as a sensor. As such, there is no complete answer to this question that Vernier can provide.

  https://www.vernier.com/til/2294

• What do I need to purchase to do AP Physics C? - Technical ...

  Rotary Motion Sensor (RMV-BTD) In order to do all of the labs in the Advanced Mechanics lab book, you will need this lab equipment: Dynamics Cart and Track System with Motion Encoder (DTS-EC) or Dynamics Cart and Track System (DTS) Springs Set (SPRINGS) Bumper and Launcher Kit (BLK) Friction Pad DTS (DTS-PAD) Rotational Motion Accessory Kit (AK ...

  https://www.vernier.com/til/2759

• Centripetal Force Apparatus Troubleshooting and FAQs ...

  4. Give the Rotating Beam a very slow spin and watch its motion. The beam will tend to settle to its lowest point. Confirm the location of lowest point by spinning the beam a couple more times. 5. Raise the lowest end or side of the apparatus by increasing the height of the nearby footer or footers. 6.

  https://www.vernier.com/til/2391

• Where do I find electronic components for use with the ...

  The Digital Control Unit (DCU-BTD) can be used with any DC electronic component or output device that requires only power and ground connections, such as an LED, buzzer, or fan. Take care to match the DCU power supply to the output devices. For instance, a 12V DC fan will run slow when connected to a DCU running on the standard (5V) LabQuest ® 3 Power Supply (LQ3-PS).

  https://www.vernier.com/til/825

• Can I program my mBot via Bluetooth with mBlock 5 software?

  Yes. There are two distinct methods for programming your mBot with the mBlock 5 software via Bluetooth. In both cases we recommend using the ,...

  http://www.vernier.com/til/4474/

• Why won't my Logger Pro experiment file work with the Motion Encoder system?

  In Logger Pro 3, experiment files, such as the “03 Cart on a Ramp” from Physics with Vernier, are expected to work, as is, when...

  http://www.vernier.com/til/4481/

• Motion Encoder System Troubleshooting and FAQs

  Specifications and User Guide also, TROUBLESHOOTING Primary Test: Does the blue light on the encoder cart light? If not, batteries may need to be replaced....

  http://www.vernier.com/til/3153/

• Motion Detector Troubleshooting and FAQs

  Specifications and User Guide There are several Motion Detector models: Motion Detector 2Green plastic, one LED on the right below the gold screen, track mode...

  http://www.vernier.com/til/1374/

• mBot Troubleshooting and FAQs

  Specifications and User Guide for mBot TROUBLESHOOTING Primary Test: If mBot is new, insert new batteries into battery pack and turn on mBot. mBot should...

  http://www.vernier.com/til/4136/

• Which Motion Detector model do I have?

  There are several Motion Detector models: It began shipping in March 2018. Made of gray plastic and cube-shaped. Teal label is printed with Go Direct...

  http://www.vernier.com/til/3269/

• What do I purchase to add a second encoder cart to my Motion Encoder System?

  The most likely reason for wanting this would be to plot the motion of two carts in a collision. There are three ways to handle...

  http://www.vernier.com/til/4478/

• Will the GDX-CFA Motor Accessory Kit work with the original CFA?

  The is not compatible with the . The orientation of the 3-step pulley and attachment to the structure do not allow for this combination. Manually...

  http://www.vernier.com/til/4450/

• How fast will the Motor Accessory Kit drive the Go Direct CFA?

  The is designed to work with the . The speed can be controlled to a maximum of about 9.6 radians per second (~90 revolutions per...

  http://www.vernier.com/til/4366/

• What sensors and devices are included in the mBot STEM Classroom Kit?

  The comes with the mBot and 2 add-on packs: the Variety Gizmos Add-on Pack, and the Perception Gizmos Add-on Pack. The electronic parts list is...

  http://www.vernier.com/til/4325/

• Why am I getting Motion Detector readings that are noisy or max out at a certain distance?

  The following tips for Motion Detectors apply to all of the following products: The maximum sample rate that you can use for the motion detector...

  http://www.vernier.com/til/5/

• What Bluetooth radio do I need for Go Direct Sensors and Python?

  To connect to your Go Direct device to Python via Bluetooth® wireless technology, you will need a Bluegiga BLED112 Bluetooth® Low Energy Dongle. https://www.silabs.com/products/wireless/bluetooth/bluetooth-low-energy-modules/bled112-bluetooth-smart-dongle Related...

  http://www.vernier.com/til/4370/

• Go Direct Centripetal Force Apparatus, Troubleshooting and FAQs

  TROUBLESHOOTING – Primary Test: Check the unit to ensure the shaft is free spinning. Confirm that the beam is securely attached to the shaft and...

  http://www.vernier.com/til/4160/

• Which motion detector should I buy? What are the differences between them?

  We sell multiple motion detectors. The motion detectors we sell are very similar and use the same ultrasonic technology. The choice of which to buy...

  http://www.vernier.com/til/2996/

• What motion detector should I buy that will work with both calculators and computers/Chromebooks?

  If you need a motion detector that works with both Texas Instruments calculators as well as computers or Chromebooks, you should purchase the following: The...

  http://www.vernier.com/til/4362/

• How old is my Motion Detector 2?

  Lift the hinged panel of the Motion Detector 2 and look at the underside. You will find a series of numbers, a gap, then a...

  http://www.vernier.com/til/3750/

• How do I measure linear position with a GDX-RMS in Graphical Analysis 4?

  has channels of either Angle or Angle (x4). The default units are radians with graphs for Radians vs Time and Angular Velocity vs Time. You...

  http://www.vernier.com/til/4069/

• Go Direct Rotary Motion Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING – Primary Test: Press the power button on the sensor to turn it on. The red LED should be flashing....

  http://www.vernier.com/til/4051/

• How do I set up a Go Direct Photogate to collect data using LabQuest App?

  Note: The following information describes how to set up Go Direct Photogates (GDX-VPG) when using LabQuest App version 2.8.5 or newer. The original LabQuest does...

  http://www.vernier.com/til/4314/

• How do I set up Go Direct Photogate for data collection in a projectile motion experiment?

  The following guide pertains to setting up a Go Direct Photogate for data collection in a projectile motion experiment. If you are looking for instructions...

  http://www.vernier.com/til/4322/

• How do I set up Vernier Photogates (VPG-BTD) for data collection using Graphical Analysis 4?

  Note: The following information describes how to set up Vernier Photogates (VPG-BTD) when using Graphical Analysis 4. If you are collecting data with a computer...

  http://www.vernier.com/til/4313/

• How do I set up a Go Direct Photogate to collect data using Graphical Analysis 4?

  Note: The following information describes how to set up Go Direct Photogates (GDX-VPG) when using Graphical Analysis 4. If you are collecting data with LabQuest...

  http://www.vernier.com/til/4315/

• How do I set up Vernier Photogates (VPG-BTD) for data collection with Logger Pro 3?

  Note: The following information describes how to set up Vernier Photogates (VPG-BTD) when using Logger Pro 3. If you are collecting data using LabQuest App,...

  http://www.vernier.com/til/3328/

• How do I set up Vernier Photogates (VPG-BTD) for data collection in a projectile motion experiment?

  The following guide pertains to setting up Vernier (BTD) Photogates for data collection in a projectile motion experiment. If you are looking for instructions for...

  http://www.vernier.com/til/3364/

• How do I set up Vernier Photogates (VPG-BTD) for data collection using LabQuest App?

  Note: The following information describes how to set up Vernier Photogates (VPG-BTD) when using LabQuest as a standalone device. If you are collecting data with...

  http://www.vernier.com/til/3329/

• Independence of Motion Accessory Troubleshooting & FAQs

  Specifications and User Guide TROUBLESHOOTING Primary Tests: – Does the Vernier Projectile Launcher or Go Direct Projectile Launcher launch a projectile when the Independence of...

  http://www.vernier.com/til/3299/

• How do I analyze slow-motion or high-speed video in your video analysis apps?

  High-speed or high-frame-rate videos are useful for analyzing the motion of objects that move too quickly to capture sufficient frames for analysis in standard 30...

  http://www.vernier.com/til/3081/

• How can I collect data from a photogate and a motion detector data at the same time in Logger Pro?

  You have a couple of options. (1) Let the software autoID the motion detector and photogate. The default experiment length will be 18 seconds. You...

  http://www.vernier.com/til/2120/

• DCU Power Output Pack (DCU-POP) Troubleshooting and FAQs

  The is a great starter set of output devices for use with the . The kit includes several output devices, including a motor, LEDs, incandescent...

  http://www.vernier.com/til/4224/

• How do you wire a stepper motor to the DCU?

  Stepper motors are great for projects and can easily be used with an Arduino and our . If you have a stepper motor and want...

  http://www.vernier.com/til/4231/

• Where do I find electronic components for use with the Digital Control Unit (DCU)?

  The can be used with any DC electronic component or output device that requires only power and ground connections, such as an LED, buzzer, or...

  http://www.vernier.com/til/825/

• How do I attach the Motion Detector bracket to the Vernier track?

  The includes two thumb screws and a permanently attached pin. To attach it to the Vernier Dynamics System track, follow these steps: Remove the thumb...

  http://www.vernier.com/til/2426/

• The LED on my Go! device or LabQuest Mini is not green. What does that mean?

  The LED on the Go!Temp, Go!Motion, Go!Link, LabQuest Mini, or LabQuest Stream is a useful troubleshooting tool: LED Color Device Status Solution Green Receiving power...

  http://www.vernier.com/til/2113/

• Why does my data table have holes (empty cells) in it?

  Some data tables will have empty cells. Sparse data tables are not errors, but can happen for a variety of expected reasons. Here are several...

  http://www.vernier.com/til/2698/

• How does a Vernier Motion Detector work (electrically)?

  This information applies to these products: Ultrasonic motion detectors all rely on the speed of sound in air for the measurement of distance. The first...

  http://www.vernier.com/til/2961/

• I can't get my accessories to attach to the Go Direct Rotary Motion Sensor.

  Some Go Direct Rotary Motion Sensors made in early 2018 are missing a nut that is used in attaching accessory parts to the unit. If...

  http://www.vernier.com/til/4179/

• Go Direct Motion Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING – Primary Test: Press the power button on the sensor to turn it on. (The red LED will flash.) Start...

  http://www.vernier.com/til/4112/

• Is there a way to calibrate the Motion Detector?

  In most cases, calibration is unnecessary. Only the Go Direct Motion Detector can be calibrated for better accuracy, by using the Motion channel and performing...

  http://www.vernier.com/til/2972/

• A mass fell into my Motion Detector and dented the screen. Can the gold mesh screen be repaired?

  The black mesh/gold film transducers on these sensors cannot be repaired if damaged due to dents or punctures: To avoid such damage, we recommend protecting...

  http://www.vernier.com/til/2655/

• Optics Expansion Kit Troubleshooting and FAQs

  Specifications and User Guide Center thickness of the three lenses included in the Optics Expansion Kit: 10 cm convex – 8.3mm 20 cm convex –...

  http://www.vernier.com/til/2948/

• What are the specs for the generator in the KidWind kit?

  There are two generators associated with the KidWind Wind Energy Kits. Both the Basic Wind Energy Kit and the Advanced Wind Energy Kit come with...

  http://www.vernier.com/til/3155/

• Go!Motion Troubleshooting and FAQs

  Specifications and User Guide Go!Motion works with the following software: Logger Lite—https://www.vernier.com/downloads/logger-lite-updates/ Graphical Analysis 4—https://www.vernier.com/ga4 Logger Pro 3—https://www.vernier.com/lp To use Go!Motion with mobile devices that...

  http://www.vernier.com/til/2115/

• Will my Go Direct Rotary Motion sensor fit into the Polarizer/Analyzer equipment?

  Experiment 28B Polarization of Light in the Physics With Vernier lab book uses the Rotary Motion Sensor (RMV-BTD) to collect angle data of the rotating...

  http://www.vernier.com/til/4057/

• With which rotary motion sensors does the Vernier Rotational Motion Accessory Kit (AK-RMV) work?

  The Rotary Motion Accessory Kit works with the and the . Everything in the will work with the older sensors with one important exception. To...

  http://www.vernier.com/til/1823/

• What is the highest rate of rotation for the Rotary Motion Sensor (standard and Go Direct)?

  There are two resolutions for our Rotary Motion Sensors. Low resolution and High resolution which leads to 4 times as many pulses for a given...

  http://www.vernier.com/til/717/

• Rotary Motion Sensor Troubleshooting and FAQs

  current style: Specifications and User Guide older style: TROUBLESHOOTING -Primary Test: 1. Attach the Rotary Motion Sensor to the Vernier data-collection interface and start the...

  http://www.vernier.com/til/1439/

• What are the dimensions of the 3-step pulley/wheel on the Rotary Motion Sensor?

  The dimensions and masses are the same for the Standard Rotary Motion Sensor and the Go Direct Rotary Motion Sensor. The measurements are as follows:...

  http://www.vernier.com/til/1012/

• I'm having trouble with some of the USB ports on my computer not connecting to Vernier USB devices.

  So far, we have had one report of Lenovo Thinkpad T530 that wouldn’t work with some Go!Motion devices on some of the laptop USB ports....

  http://www.vernier.com/til/3958/

• Will your Motion Detector show the speed of a (car, baseball, racquetball)?

  Ultrasonic motion detectors only measure the position of an object that is directly in front of it, within about 3 meters (10 feet). It is...

  http://www.vernier.com/til/1036/

• How come my Arduino sketch to control a servo motor with the DCU is not working?

  The DCU has a 3-pin connector to connect a servo motor. The DCU line used to control the servo is line 4. The DCU has...

  http://www.vernier.com/til/3430/

• Rotary Motion Motor Kit