Extra-Long Temperature Probe (TPL-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Connect the Extra-Long Temperature Probe and run the data-collection program. Hold the tip of the sensor in your hand and c...
A movie may display as a blank (white or black) object for one of these reasons:
There is a message that begins with Can't find movie. In this case, the link to the movie file is broken. Make sure the movie file is in the proper location. See Ho...
Yes. LabQuest App version 2.7 and newer allows for full manual scaling of the graph. Older versions of LabQuest App, the autoscale feature would override manual scaling.
To get the latest version of the LabQuest App, seehttps://www.vernier.com/down...
Bug Fixes in 2.7.1
● Go Wireless Heart Rate live readouts were not displayed when you first connected to the sensor
● Battery indicator was not showing correct battery level when using LabQuest with languages that use the comma as a de...
Vernier Thermocouples have been updated a few times since they first began shipping.
In September 2016, we changed the calibration from linear to 2nd order polynomial to get better accuracy. These units have model number TCA1816R3 on the label. Logg...
If you are having trouble connecting to an Enterprise network and you keep getting prompted to reenter the passphrase, try the following...
1. Make sure you are running the latest version of the LabQuest software.a. LabQuest 2—Tap Home > Syste...
No.
We do not plan to build or sell either mercury or sodium discharge lamps.
The maker of our discharge lamps does not want to work with mercury for safety reasons.
Sodium requires an oven to melt the sodium, as it is solid at room tempe...
Follow these instructions to remove or replace a Go Wireless® 250 mAh Replacement Battery (GW-BAT-250), in your Go Wireless Link. Follow these instructions carefully as PERMANENT DAMAGE can result if not done properly.
To replace batteries on...
The best way to attach either chipboard or balsa wood to a dowel so it can be used with a KidWind Wind Turbine Hub is to use glue.
If time is short, the best quick-curing option we have found is regular hot melt glue, applied with a standard glue ...