Occasionally a Mini GC will drop its connection with your computer or LabQuest when the Temperature and Pressure are initiating and then suddenly reconnect. This typically happens when you initiate the Temperature/Pressure profile. There is nothing w...
Go Direct® Motion Detector (GDX-MD)
Specifications and User Guide
Which Motion Detector model do I have?
Troubleshooting
Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting ...
Generally, calibrations are not required; therefore, most motion detectors don't support calibration.
Calibrate a Go Direct Motion Detector
Only the Go Direct Motion Detector can be calibrated. A one-point calibration, based on a measured d...
The answer depends on the motion detector you have. This type of damage is not covered under warranty.
Can Be Repaired
The transducer on a Go Direct Motion Detector can be replaced in the event of damage. However, there will be a repair fee. C...
The information below is relevant if using specific Vernier interfaces (LabPro, original LabQuest, LabQuest Mini, and LabQuest Stream) connected to a Windows computer running Logger Pro (3.14.1 or newer) or Logger Lite (v1.9.3 or newer).
Important n...