If you have connected your mBot to your PC/Mac/Chromebook via USB and you cannot get the mBlock software to connect to your mBot, try the following: 1. Verify that mBot is turned on. 2. Verify that the Arduino driver is installed. The microcontrol...

mBlock, one of the iOS programs for use with mBot and other MakeBlock robots requires iOS 9 or newer. mBot Troubleshooting and FAQs...

If you are selectively enabling Bonjour on your network (via Bonjour Gateway or another such method) then you will need to allow LabQuest Bonjour service strings. They are: _vernier-data._tcp. _labquest-rfb._tcp. Note: Depending on your network conf...

This is an error that results from the LabVIEW installer attempting to install the LabQuest driver. The LabQuest USB driver that was included with this installer is no longer valid on Windows computers. When you run the installer you will get a serie...

Yes, Vernier sensors can be used with the NI-ELVIS system. To connect Vernier analog sensors to NI-ELVIS use the Analog Protoboard Adapter (BTA-ELV) To connect Vernier digital sensors to NI-ELVIS use the Digital Protoboard Adapter (BTD-ELV) ...

Yes. We have developed an adapter that makes it easy to connect Vernier LabQuest sensors to the NI myDAQ. Please be aware that this adapter can only be used with sensors that have a BTA cable. They cannot be used with Go Direct Sensors. Vernier...

Yes, our sample files for LabQuest, Go! Devices and SensorDAQ include support for both the 32-bit and 64-bit versions of LabVIEW. This is true for LabVIEW versions starting at LabVIEW 2016. Our files for older versions of LabVIEW only support 32-bit ...

Vernier no long distributes LabVIEW for Education. LabVIEW for Education is a specific license of National Instruments' LabVIEW software for US high schools only. It includes built-in LabVIEW examples for certain Vernier products, as well as LEGO...

Vernier Software & Technology has always encouraged instructors and students to do their own programming using our lab interfaces and sensors. We started experimenting with LabVIEW in 1999. In 2001, we introduced our first VIs for LabPro. A recent ch...

Go Direct Sensor Carts (GDX-CART-G or GDX-CART-Y) Specifications and User Guide Troubleshooting Primary Test: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started inst...