Short answer:Yes, but that is probably not what you actually want. In most cases, what you wants is for Logger Pro to talk to the devices. When you use the Vernier-created full installer of Logger Pro, the drivers are included. If you need to instal...
LabQuest 3
LabQuest 3 can print to IPP-enabled network printers. IPP, which stands for Internet Printing Protocol, is available on most printers manufactured after 2018. In order to print, the LabQuest 3 unit must be on the same Wi-Fi network as...
This information pertains to LabQuest 2 and 3.
If you have an original LabQuest, see this article.
The Windows Device Manager tells you every piece of hardware that your computer knows about. You can access the Device Manager from the System Prope...
Pressure Sensor 400 (PS400-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Connect the sensor to a Vernier interface and run the data-collection program. The units for the default readings are kPa and they sh...
The Rotational Motion Accessory Kit (AK-RMV) includes several discs for rotary motion experiments.
Smooth discs: 1.05 x 10-4 kg m2Typical dimensions and masses▸The disc with a small hole: 106 g, 89.0 mm diameter, 3.6 mm hole▸The disc with co...
The Rotary Motion Accessory Kit works with the Rotary Motion Sensor (RMV-BTD) and the Go Direct® Rotary Motion Sensor (GDX-RMS).
Everything in the Rotational Motion Accessory Kit (AK-RMV) will work with the older sensors with one important ex...
There are two resolutions for our Rotary Motion Sensors. Low resolution and High resolution which leads to 4 times as many pulses for a given rotation. The max rotational speed is higher with the low resolution setting.
For Vernier-manufactured...
Rotary Motion Sensor
RMV-BTD—Sensor onlyRMPK-BTD—Sensor + Accessory Kit
Specifications and User Guide
Rotary Motion Sensor
Rotational Motion Accessory Kit
Troubleshooting
Primary Test: Attach the Rotary Motion Sens...
The dimensions and masses are the same for the Standard Rotary Motion Sensor and the Go Direct Rotary Motion Sensor. The measurements are as follows:
Diameter of small groove: 10 mm
Diameter of medium groove: 29 mm
Diameter of large groove: 4...
This information pertains to the original LabQuest.If you have LabQuest 2, see this article.
This document has information for device drivers that work with older versions of Logger Pro. If you are using a Logger Pro version 3.11 or newer with La...