This information pertains to LabQuest 2.
If you have an original LabQuest, see this article.
If you have a LabQuest 3, see this article.
LabQuest 2 takes about 90 seconds to boot. If LabQuest 2 gets stuck on the logo screen or only boots up as ...
Yes. We make a multi-bay charger can charge 4 interfaces simultaneously: LabQuest® Charge Station (LQ3-CRG)
For additional information see:
Do I need to purchase a LabQuest Charging Station?
Will LabQuest 2 with Lab Armor installed fit into the ...
Each LabQuest unit includes a "wall wart" plug-in AC charger. If you have AC power at each lab station, we usually recommend that you just leave your LabQuests plugged in at each station the entire semester. That way, you never need to worry about wh...
Logger Pro will display the message "No Device Connected" in the toolbar when a device such as LabQuest, a Go! device, or a Spectrometer, cannot be found. Below are troubleshooting steps to solve the most common problems. Note: Except for spectr...
Which fluorescent stains or dyes work with the BlueView Transilluminator?
Can the BlueView Transilluminator be used with fluorescent stains that excite in the visible light range?
Are Ethidium Bromide (ETBR) stained gels readable using a BlueView T...
Contact Vernier’s Tech Support to arrange a repair or replacement of the lid.
If you are comfortable with removing and replacing the lid with a screwdriver, we can send a replacement lid. If not, we can arrange to have the whole unit come in for...
The BlueView Transilluminator (BLUE-VIEW) contains LEDs that emit light in the 450 to 490 nm range. This intense blue light will excite many fluorescent stains or molecular markers. The orange lid ensures that only the emitted light from the stain is...
To replace an entire adapter and cable for a Blue-View, order Replacement Power Supply for BlueView Transilluminator (BLUE-VIEW-PS).
...
Short answer:Yes, but that is probably not what you actually want. In most cases, what you wants is for Logger Pro to talk to the devices. When you use the Vernier-created full installer of Logger Pro, the drivers are included. If you need to instal...
LabQuest 3
LabQuest 3 can print to IPP-enabled network printers. IPP, which stands for Internet Printing Protocol, is available on most printers manufactured after 2018. In order to print, the LabQuest 3 unit must be on the same Wi-Fi network as...