It will work; however, you must use the TARE key instead of the ZERO key.
The TARE key is available on the following OHAUS Scout models. (OHAUS Scout Pro models continue to use the ZERO key.)
OHAUS Scout® 220 g (OHS-222)
OHAUS Scout® 420 g ...
To get the most efficiency out of a wind turbine that you are testing indoors with a fan, the turbine blades should have about the same length as the radius of the fan. Any portion of the turbine blade that extends beyond the fan blade length will no...
The LED should turn green after the spectrometer has time to warm up. If it does not turn green, first turn off the instrument, then unplug the USB cable and the AC power. Plug back in the AC power, turn on the instrument, and wait for it to warm up....
There are a few possible causes for a USB drive to not be recognized by LabQuest:
If the USB flash drive doesn't appear to work, cancel the Save or Open, and try again. You need to allow about 10 seconds for the drive to initialize after it is c...
Drop Counter reservoirs and tips are calibrated differently than other Vernier sensors. The volume of the drop is actually a function of the reservoir, the tip, the height of the liquid in the column, and the properties of the liquid (such as viscosi...
New Features in 2.7.2
● New Sensor Support
○ Go Direct SpectroVis Plus - via USB connection only
○ Ohaus Scout balances (SKX series)
χ...
Yes, you can purchase it separately: Replacement Power Supply for Vernier Mini Gas Chromatographs (GC2-MINI-PS)...
Wind turbine support:
To support the motor/generator for the Wind Power event, either the KidWind Basic Wind Experiment Kit (KW-BWX) or the KidWind Advanced Wind Experiment Kit (KW-AWX) includes a tower and nacelle that can be used to support the...
Logger Pro will no longer receive updates. Logger Pro v3.16.2 was the final release.For more information, see Logger Pro will no longer receive updates.
To install Logger Pro with the silent installer via Group Policy, you need to have your compu...
The Pasco CI-6538 Rotary Motion Sensor is made to work with Pasco interfaces and can not be adapted to work with Vernier interfaces.
In contrast, there is a similar version marked CI-6625 can be used with a LabPro or LabQuest using the Rotary Moti...