This information pertains to LabQuest 2.
If you have a LabQuest 3, see this article.
The original LabQuest does not support this feature.
These instructions are for LabQuest 2s that have been updated to 2.7 or higher. If you have not updated your ...
In February of 2017, Go Direct® SpectroVis® Plus Spectrophotometer (GDX-SVISPL) replaced the SpectroVis Plus (SVIS-PL, discontinued).
There are very few differences between the Go Direct SpectroVis Plus and the SpectroVis Plus (SVIS-PL) when...
The calibration equations for the CO2 Gas Sensors are listed below. They are divided into the old model (square body, pre-2007) and newer model (rounded body, post-2007).
Sensor 'CO2 Gas' (-DIN and -BTA, pre-2007)
Calibration 'CO2 ppm':
...
Arduino is an open-source physical computing platform based on a simple microcontroller board as well as a development environment for writing software for the board. For introductory materials to using Vernier sensors with Arduino, see:
https://www...
Logger Pro installs and upgrades of version 3.13 and later on Windows 10 will frequently require a reboot to install certain files. The installer is detecting that files that it needs to copy onto the system are already loaded in memory. In order...
The UV-VIS Spectrophotometer comes with a set of two Starna Quartz cuvettes: Quartz Cuvettes (CUV-QUARTZ). The Fluorescence/UV-VIS Spectrophotometer comes with one Starna Fluorescence Quartz cuvette: Fluorescence/UV Quartz Cuvette (CUV-QUARTZ-FUV)
Th...
The Z dimension refers to the position of the light beam transmitting through the cuvette. It is an important specification when working with small-volume samples.
Go Direct SpectroVis Plus: 8.5 mm
UV-VIS Spectrophotometer: 8.5 mm
Fluorescence/UV-VI...
Logger Pro 3.14 and LabQuest 2.7.2 or newer remember calibration settings between mode changes, so this should not be an issue if you are using the latest version of the software. Make sure you have updated. ...
This combination is not officially supported. You may be able to collect data from a SpectroVis Plus (not Go Direct version) but you will likely have connection issues and/or be frustrated with analysis options.
Instead of Logger Lite, we highly rec...
You should Select Intensity Correction when comparing sources with continuum spectra (e.g., incandescent sources).
Please note that this correction will only work properly if you are using the optical fiber attachment to your Vernier-branded spectro...