The Print to File feature, found in LabQuest App version 2.7 or newer, allows you to save a PDF print file to a USB flash drive or micro SD card for printing at a later time. This enables you to print graphs, data tables, notes, lab instructions, a...
You can find this information using the Go Wireless data-collection software.
Go Wireless app or Graphical Analysis GW for iPad, iPhone, and iPod touch
1. Press the power button on Go Wireless sensor to turn it on. The sensor LED will flash red.
2. ...
By default, Go Wireless sensors are shipped with the same default name. When using multiple sensors in the same classroom, it can be advantageous to give each probe a unique name.
Go Wireless app for iOS
1. Launch Go Wireless app.
2. Press the power...
Below are some frequently asked questions regarding the battery for Go Wireless sensors.
Q: Is there a way to tell the status of the battery?
A: See the below information for your specific application.
Go Wireless app or Graphical Analysis (v2.0 or...
Custom calibrations and unit choices can be saved to many sensors. As a result you may want to return the sensor to factory default settings.
You can do this in several applications:
Using Logger Pro:
1. Choose Calibrate --> (sensor name) from t...
O2 Gas Sensor (O2-BTA)
Specifications and User Guide
Which Oxygen Gas Sensor do I have?
2007 - 2021 Version
Current Version
Troubleshooting
Primary Test: Blow on the sensor. Do you see a decrease in the Oxygen Gas re...
Many of our electric circuits experiments, such as the Ohm's Law experiment in Physics with Vernier (PWV) require students to construct circuits from batteries, resistors, light bulbs, and other electronic components. We recommend using our Vernier C...
There are some sensors that include the autoID feature, but that feature does not work on LabPro. This is not a sensor shortcoming, but is due to the LabPro firmware not having information about the sensor.
Sensors that do not autoID with LabPro ...
When connecting LabQuest interface to a Windows 7 computer after installing Logger Pro, the final process for making the WinUSB device driver available to the operating system and Logger Pro is complete. Some names for this process include "getting t...
When an Ion Selective Electrode (ISE) is connected to a Go Wireless Link, the attached sensor can be identified incorrectly. This happens when you have a "dry" electrode, one that has not been properly soaked, or when the sensor is "in air" instead o...