For new calculators, No. For most older calculators, Yes. In addition to the Vernier Radiation Monitor (VRM-BTD), you will need software and a sensor interface appropriate for your supported calculator. Note: For instructions on installing calc...

You can distinguish between older and current versions of the Magnetic Field Sensor (MG-BTA) based on the appearance of the sensor. Current -Black plastic shaft with a swiveling head and a white dot at the end of the tip -Range switch on the sha...

It is not necessary to perform a new calibration when using the Light Sensor (LS-BTA) in the classroom. You can simply connect the sensor to a Vernier data-collection interface and start your Vernier data-collection program. When the sensor is automa...

EKG Sensor (EKG-BTA) Specifications and User Guide Troubleshooting Primary Test: The most common cause of problems with this sensor is a poor connection, either between the tabs and the skin, or between the clips and the tabs...

Short Answer: Yes. Use Logger Pro versions 3.10.2 through 3.15. Longer Answer: Apple released Mac OS X 10.11 (El Capitan) on September 30, 2015.  Apple (and Vernier) typically support any given major OS version for 3 years with newer software vers...

No. Pasco's current motion detector is NOT COMPATIBLE with our LabQuest interfaces due to hardware conflicts. Over the years, Pasco has sold different versions of its motion detector. Some of these models may be able to work with some of our interfa...

The beam height is 8.5 mm. Also see: What is the Z dimension or beam height of your Spectrometers?...

The most likely reason for not seeing satellites is a poor view of the sky. Test with the GPS outside, with nothing overhead. The GPS is not designed to work indoors. Allow up to 10 minutes to capture satellites on the first use. It will be faster on...

The Vernier GPS Sensor (VGPS, discontinued) will not function with Logger Pro (any version) on Mac OSX 10.10 (Yosemite) or newer. Beginning with Logger Pro version 3.11 (released in early 2016), the Vernier GPS Sensor will not work on any Macintosh c...

No, neither the older Friction Pad (PAD-VDS) nor the Friction Pad DTS (DTS-PAD) can attach to either of the fan carts. Fan Cart (CART-F) Encoder Fan Cart (CART-FEC) You can mount the appropriate friction pad to one of your dynamics ...