For best results, use a Vernier Emissions Fiber (VSP-EM-FIBER).
For better results when not using an optical fiber:
Align the aperture directly with the light source. Misalignment can shift the measured wavelengths of spectral lines by as much as th...
Fan Cart (CART-F)
Specifications and User Guide
Encoder Fan Cart (CART-FEC)
Specifications and User Guide
TROUBLESHOOTING
Primary Test: Check that batteries are installed and are charged. The fan requires four (4) AA batteries for power; the batter...
This article is for the Wired (BTA) Optical DO Probe.For the Go Direct Optical Dissolved Oxygen Probe, see How do I replace a cap on the Go Direct Optical Dissolved Oxygen probe? (step 10).
Vernier Optical DO Probe (ODO-BTA)
A Calibratio...
Our Power Amplifier (PAMP) is a great option for driving a speaker, such as our Power Amplifier Accessory Speaker (PAAS-PAMP), or an AC circuit. The Power Amplifier requires a function generator to control it. Whenever possible, we recommend using th...
Yes, resonance in RLC circuits can be investigated with either the Vernier Circuit Board (discontinued)or the Vernier Circuit Board 2 (VCB2).
If using the Vernier Circuit Board, an inductor such as Inductor (IND) will be needed. However, the Verni...
Yes, we have a drop counter! The Vernier Drop Counter accurately records the number of drops of titrant added during a titration. The software can record volume in drops or mL, and can simultaneously record pH (pH sensor sold seperately). The Drop Co...
The body of Plastic 2-Way Valve (PS-2WAY) is polycarbonate and the handle is high density polyethylene. This is true for the older 3-way valve (discontinued), as well.
The chemical resistance is good when using dilute acids, alkaline solutions, al...
This sensor is no longer available. Information is presented for reference only.
Sound Level Meter (SLM-BTA, discontinued)
Specifications and User Guide
Troubleshooting
Primary Test (stand alone): Use the Power bu...
Occasionally the motion encoder system will work as a ratchet, with readings only increasing or only decreasing. This is not a setting in Logger Pro or LabQuest App; no software change can create the problem. The issue is between the detectors on the...
Although the Physics program was originally written for the original CBL, it has been adapted to work with the CBL 2 and LabPro interfaces. The use of photogates is different depending on the type of interface that is being used. The program will ad...