LabQuest Viewer 2.0 for iPad crashes on launch if it is installed on an iOS 8 iPad that is then updated to iOS 9.
To resolve this issue, delete and reinstall LabQuest Viewer.
...
This issue was resolved with the release of Video Physics 3.0.3. Update to this version (or newer).
...
This information pertains to LabQuest 2 and LabQuest 3.
If you have an original LabQuest, see this article.
If LabQuest 2 or LabQuest 3 won't turn on at all and the screen remains dark, there could be a hardware problem and it may need to come...
The Photogate Bracket (PGB-VDS) will work on a PASCO track with a minor modification.
The slot on the side of the PASCO track is a little narrower than the slot on the side of the Vernier track. The Vernier Photogate Bracket has little nubs that k...
For Go Direct ISEs (order codes begin with GDX-), simply enable the sensor's mV channel in the app.
For most LabQuest ISEs (order codes end in -BTA), there is an experiment file within Probes & Sensors-->ISE folder in Logger Pro (version 3.4 ...
The Sound Level Sensor (SLS-BTA) is a lower cost alternative to the Sound Level Meter (SLM-BTA, discontinued). It is a simple, easily-operated sensor to measure and investigate sound levels in typical classroom environments.
The Sound Level Meter ...
Vernier accelerometers measure acceleration along the line marked by the arrow on the label. Accelerations are normally measured in either meters per second per second (m/s2) or g's. One g is the acceleration due to gravity at the Earth's surface, or...
If you teach biochemistry, you will find numerous Vernier labs and products that can fit nicely into your curriculum.
Topics and Techniques
The following information lists common experiments performed in Introductory Biochemistry labs and the ...
There are two LED types included with the KidWind simpleGEN (KW-SGEN), a 10 mm red diffused LED and a 5 mm bi-color LED that appears white when not in use. Vernier does not sell replacements for the LEDs, and they are not covered under our standard 5...
Make sure you are using a supported device and running the most recent version of either the Graphical Analysis/Graphical Analysis Pro App or the Graphical Analysis GW App.
See Go Wireless Sensors - Computer, Tablet and Mobile Device Support Details...