The force sensor (aka load cell) reading is affected by minor variations in motion affecting the connection between the sensor and the structure, as well as minor voltage fluctuations.
Our experiment files take advantage of oversampling to minimize t...
Potassium Ion-Selective Electrode (K-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Check the raw voltages while calibrating in the standards. The high (1000 mg/L) should be around 2.7 volts. The low (10...
Ammonium Ion-Selective Electrode (NH4-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Check the raw voltages while calibrating in the standards. The high (100 mg/L) should be around 2.1 volts. The low...
Dynamics Cart & Track System
DTS—1.2 m track, no sensors includedDTS-LONG—2.2 m track, no sensors included
Specifications and User Guide
Which model dynamics cart do I have?
Vernier Dynamic System (discontin...
The Pasco super pulley clamp's 1.7 cm opening will not allow it clamp the end of the Vernier track.
Pasco makes two versions of the Super Pulley: one has a threaded nut on the inside, and one does not. When sold with the clamp (shown), Pasco usual...
The most popular choice is the 1.2 m track. The right choice for your lab depends on the activities in your curriculum. All of the activities in Physics with Vernier can be performed with the 1.2 m track, including two-cart collisions.
The 2.2 m tra...
LabQuest can't collect from Go! Devices at rates slower than two samples/hr. Go!Temp and Go!Link both have this issue.
If you try to collect at a slower rate it will collect a sample every 30 minutes for the desired number of points, and mislabel th...
Support for Vernier Analog (BTA) and Digital (BTD) Sensors
The LabQuest emulator runs LabQuest software version 1.5 and supports many of the same sensors as the LabQuest App. Sensors supported with newer versions of the LabQuest app (v1.5.2 and new...
The LabQuest Emulator is a free simulated version of the original LabQuest App v1.5 on a Windows® computer. Use it to test drive the LabQuest App or project onto a screen for your class.
Due to licensing limitations we are no longer able to distrib...
PAR Sensor (PAR-BTA)
Specifications and User Guide
Which Apogee sensor head does my PAR Sensor have?In May of 2023 the SQ-100X sensor head was introduced for the PAR sensor (previous model was SQ-110). The head of the new sen...