If you do not have the Go Direct® Energy Sensor (GDX-NRG), Vernier Energy Sensor (VES-BTA), or the Differential Voltage Probe (DVP-BTA), and the Current Probe (DCP-BTA), you can purchase inexpensive multimeters at a number of online and brick-and...
Yes, if you purchased your basic kit after January of 2015, you simply need the KidWind Basic to Advanced Experiment Kit Upgrade (KW-BUPA).
The difference between the 2015 version of the KidWind Basic Wind Experiment Kit (KW-BWX) and the KidWind A...
Tip #1: Test the equipment prior to advancing into the field with a group of students. Nothing is more disappointing than discovering issues while in the field or realizing data was not saved when returning from the field.
Tip #2: Charge the LabQues...
The % setting on Optical DO Probes purchased prior to January 2015 is 0-100%. Optical DO Probes purchased after January 2015 can measure from 0-300%. If you are unsure of the purchase date, check the serial number or the stored factory calibration.
...
If you are having problems collecting data for this experiment when using LabQuest as a standalone device, make sure you are using the LabQuest-specific instructions for the lab activity. The LabQuest instructions for this activity can be found on th...
You can use the Modify option of the LabQuest Viewer Windows installer to reinstall the Bonjour software. When selecting to Modify the install, do the following:
1. Select the Bonjour version appropriate for your system: 32-bit or 64-bit
2. Selec...
We recommend a page on the Flinn Scientific website. Flinn keeps a comprehensive library of the most common chemicals used in K-12 schools. In addition, the SDS documents from Flinn are up to date with references to the newly established (as of 2013)...
Yes, but some special setup is required.
Note: The Go Direct® Structures & Materials Tester (GDX-VSMT) is not supported.
The Vernier Structures & Materials Tester (VSMT) has an analog force sensor and a digital displacement sens...
The Vernier Structures & Materials Tester (VSMT) displacement sensor is not automatically recognized by our software. You can manually set up the sensor in Logger Pro and the LabQuest app by the following methods:1) Logger Pro - Click on Experime...
LabQuest Viewer 2.0 software requires Windows 7 Service Pack 1. Update your Windows 7 software to SP1 or newer in order to use LabQuest Viewer.
Related Topics
Why does LabQuest Viewer 2.0 prompt me about Microsoft .NET Framework on my Windows 7 ...