For instructions on applying a correction factor to the PAR sensor readings, see For most cases you will not need to use a correction factor......
Vernier PAR sensors are calibrated before shipping and should not need calibration. You can verify the calibration using the Clear Sky Calculator at: www.clearskycalculator.com The......
The Vernier light sensors can not be used to measure PAR, photosynthetically active radiation. They do not have the right spectral response nor are they......
Yes. Logger Pro 3.8.3 is the first version to support Ocean Optics devices on 64-bit Windows Vista and Windows 7....
1) Separate the light source/cuvette holder from the detector. To do this, look at the “bottom” (not the underside) of the light source end of......
First, get a small screwdriver with a flat head. We found one at Ace Hardware, for $0.89, that works perfectly. The screwdriver’s head should be......
Set up your spectrometer to collect a full absorbance spectrum with a computer and Logger Pro 3. Follow these steps to prepare the column of......
Follow the steps below to add a file of emission spectrum data to a graph: Note: Logger Pro 3 contains a folder with sample files......
At sample times (also known as integration time) greater than 1000 milliseconds, it is impossible to differentiate between the normal signal noise of the spectrometer......
We do indeed continue to support the original CBL. A great way to get started is by following the instructions in the CBL Made Easy......