The short answer is: yes.
Here are some important points to remember:
(1) The recommended injection volume for the Mini GC is 0.8 - 1.0 milliliter (mL) of gas.
(2) Vernier does not sell a 1 mL gas-tight syringe.
(3) The maximum outside diameter syri...
This information pertains to the original LabQuest.
If you have LabQuest 2 or LabQuest 3, see this article.
Units of the Vernier Microphone (MCA-BTA), produced between April of 2007 and August 22, 2011, may exhibit a conflict with original LabQues...
Vernier data collection apps are designed to support best practices for data collection. Just as you wouldn't erase data from a lab notebook, our software prevents you from deleting selected data points from a particular trial. Instead, you can stri...
Logger Pro 3 is no longer sold and will no longer receive updates.For more information, see Logger Pro will no longer receive updates
Yes. Logger Pro supports Windows tablets that are running the full version of Windows 10 or Windows 11. However,...
Yes. KidWind Project® has worked closely with Vernier to produce a series of experiments to quantify the power and energy output of Kid Wind’s wind turbines, solar cells, and fuel cell products. We have found this hardware and software easy to use...
We have been collaborating with the Great Lakes Bioenergy Resource Consortium, and they have developed a series of exercises on fermenation and biofuels that use Vernier probeware. You can find the educational materials at:
http://www.glbrc.org/ed...
This information pertains to the original LabQuest and LabQuest 2.
If you have a LabQuest 2, see this article.
Before following these instructions to add the driver for the HP LaserJet Pro 400, your LabQuest version must be 1.7 or LabQuest 2 mus...
Short answerMore than you would need for just about any experiment.The internal memory allows you store a lot of data, both in one file, and across many files. Since data files take up very little storage compared to pictures, we have not seen the a...
The column inside the Mini GC and Mini GC Plus is a Restek MXT-1 stainless steel capillary column with dimethyl polysiloxane. Injecting anything through the column that is not on the approved list of compounds (see the accompanying booklet or online)...
No. The Optical DO Probe is not calibrated to measure oxygen gas in air nor can it be calibrated for this measurement.
If you want to measure oxygen gas, you may want to consider the O2 Gas Sensor (O2-BTA).
...