Manual configuration mode is a special mode of Logger Pro designed for instructors wishing to have their students set up data collection and graphing themselves. Logger Pro will no longer set data-collection rate and duration, and graphs will no long...
Graphical Analysis and Graphical Analysis Pro use a network service called "Bonjour" to automatically discover data sources (LabQuest 2, LabQuest 3 or Logger Pro). On networks that do not allow Bonjour, you will need to manually connect to the data...
We do not currently carry an adapter for any of the amplifiers offered from Backyard Brains. ...
Densitometry and / or measuring band intensity is not current supported in Logger Pro....
Number of pointsPractical Limit = 1 MillionHard Limit = 500,000,000 data cells
Maximum number of interfacesLabQuest Interface (any type) = 8Go! Device (Go!Link, Go!Temp, or Go!Motion) = 8Combination of the above = 8LabPro Interface = 5
...
UVB Sensor (UVB-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Are you using the UVB Sensor to check UVA light? Confirm that the sensor is appropriate for the experiment.
Secondary Test: Take readings...
A change in the manufacturing of the UVA Sensor (UVA-BTA) and UVB Sensor (UVB-BTA) causes some sensors to display with incorrect units in older versions of Logger Pro. Instead of showing mW/m2 (that should be a small superscript two) Logger Pro incor...
A mini UV Lamp can be purchased from Wards Natural Science, wardsci.com. The lightweight unit contains a six-inch tube that emits 365 nm longwave UV. It is composed on high-impact plastic and has an attached lanyard for easy handling. Four AA batter...
Note: This information pertains to the Hand Dynamometer (HD-BTA).
Yes, you can reattach them yourself using an adhesive specifically made for rubber and plastic. One such adhesive we use that is readily available online and at some stores is 3M Scot...
Hand Dynamometer (HD-BTA)
Specifications and User Guide
Original Version
Current Version
Which version of the Hand Dynamometer do I have?
Troubleshooting
Primary Test: Confirm that the sensor was properly zeroed. If th...