The TI-82 will automatically recognize the Vernier auto-ID sensors and load appropriate calibrations. When you plug in the auto-ID sensor, you will see the “checking......
This is only an issue for Logger Pro 2 and not Logger Pro 3. The ILD experiments were originally set for using the ULI interface.......
According to Hach Co. the glass tubes used with a Vernier Turbidity Sensor can be autoclaved for sterilization purposes. However, the caps cannot. These turbidity......
There is a timing error in the abosrbonce vs. time data collection mode in Spectro Pro when data is collected on a Genesys 20 spectrophotometer.......
Logger Pro version 2.0 may experience difficulty with USB drivers on some machines. The best solution to this problem is to uninstall Logger Pro from......
This problem is unique to Windows NT 4.0/2000 and is a permissions issue. Download the latest version of Logger Pro at: http://www.vernier.com/tech/lpupdates.html then install that......
Technical specifications for our sensor can be found on our website at: http://www.vernier.com/probes/specs/ If you have any questions that can not be answered by the......
If your HMP-BTD adapter was shipped prior to November 2000, you likely need a revised HMP-BTD. Please contact Vernier Software at (503) 277-2299 to exchange......
The problem is that the ULI, or SBI, can only read positive voltages. Listed below are several options to read both positive and negative voltages:......
The Palm Desktop application must be installed and the handheld HotSync’ed successfully prior to installing Data Pro. You may find the Palm Desktop for Macintosh......