Soil Moisture Sensor (SMS-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: In air, the Soil Moisture Sensor should read somewhere between -5% and -50%. Grab the sensing portion with your hand, and the read...
Logger Pro only allows the importing of "approximate" data from the family of calculators including the TI-89, TI-92, TI-92 Plus and Voyage 200. To ensure that Logger Pro will be able to import data from your calculator, the calculator must be set t...
First test:
Check to see if you have an original Go! Link. The old units are labeled "Go! Link" and the newer style read "Go! Link by Vernier."
Some older units had problems with current draw which causes the sensors to auto-ID incorrectly. For e...
TI-Nspire Handhelds
TI-Nspire Lab Cradles – No
EasyLinks (or Go!Link with an adapter) – No
Computers running TI-Nspire software
TI-Nspire Lab Cradles – NoWhen a second Lab Cradle is connected to a computer, it is ignored by ...
Generally, no.
The TI-Nspire Lab Cradle does not support data collection with devices connected directly to its mini-USB port; the USB port is used for charging and computer connectivity only.
EasyTemp - No
EasyLink - No
C...
In general, we do not recommend the use of USB-direct sensors (EasyTemp/Go!Temp, CBR2/Go!Motion) or interfaces (EasyLink/Go!Link) while using the Lab Cradle. This combination of data collection devices will experience timing accuracy issues between d...
To check the software version on the TI-Nspire handheld follow these steps:
1. Press the HOME key (this key has a picture of a house on it).
2. Select 5:Settings and Status, then choose 4:...
If the LabQuest has a lot of files (more than ~300), trying to use the LabQuest Browser in Logger Pro may report "Error communicating with LabQuest: 1. Cannot browse device." and then disconnect from Logger Pro.
If this happens:
1) Disconnect the La...
There are a few commonly available products that you can use to measure fluorescence with the SpectroVis Plus. The easiest is extra virgin olive oil. You don't need to prepare the sample in any way. Pour about 3 mL of olive oil into a cuvette and you...
The end pieces of the Rotating Beam must be removed in order to slide the carriages onto the Rotating Beam.
Next, with the ruled side of the Rotating Beam facing you, attach the Counterbalance Carriage on the left, and attach the Sliding Carriage...