Logger Pro version 3.8.4 and newer has several improvements to prevent BlueTooth-related errors. If you have an older version, the first thing to try would be upgrading to the new version of Logger Pro. The updater is a free download from our web sit...
This is a problem with the calibration of the LabQuest Mini's DAQ. It will need to come in for repair. Please contact our technical support team at info@vernier.com to arrange a repair.
Symptoms will be phantom sensors or two identical sensors tha...
Logger Pro makes default calibrations available for all common units for supported sensors. Most Vernier sensors are auto-ID sensors. Auto-ID sensors can be either Smart sensors or Resistor-ID sensors. Smart sensors contain a memory chip that stores...
There are four possible explanations:
It was manufactured before 2008, which is when it became auto-id.
If you are trying to use a Drop Counter with a LabPro, the Drop Counter will not auto-id. This is because the firmware in the LabPro pre-dates th...
130 x 50 x 1.5 mm external dimension.
There is one 50 mm bar, and also a series of 13 alternating clear and black bars, with an interval of 10 mm.
The cart picket fence fits Vernier dynamics carts only. ...
Logger Pro
To change the number of points in the derivative calculation, open the File menu and choose Settings For FILENAME. Then adjust the number of points for derivative calculations and select OK.
LabQuest
To change the number of points in th...
The leads on the 30-volt voltage probe are shrouded to meet European (especially French) safety standards. The shroud means that they will not plug into a European 220-volt wall socket.
Most modern multimeters use probes of this type, so they are...
Some Garmin GPS units have a mode that show this behavior. You can fix it by going to:
Main Menu > Setup > System > Interface > Set to Garmin Spanner. Now, when the Garmin is plugged into a computer, it will ask on the screen if you would like to go...
Check the black ink cartridge - it is most likely out of ink or the print head is clogged. The graph prints using the color inks while the titles use black ink.
...