Yes. LabQuest is capable of putting out an analog output signal to the audio out connector. The miniature stereo connector is located on the left side of an original LabQuest, on the top of the LabQuest 2 under a protective flap, and on the top of th...
In the Summer 2007, we standardized the experiment numbers across the computer, calculator, LabQuest, and Palm versions of the labs and renamed the books from "... with Computers or Palm" to "... with Vernier."* In Logger Pro 3.6 and newer, the files...
Yes, you can use a Go!Temp, Go!Motion, or Go!Link with the LabQuest App on any LabQuest unit.
Original LabQuest
LabQuest 2
LabQuest 3
Note: If you have an original LabQuest, you must have LabQuest App version 1.2 or newer. To ens...
First, make sure you are running the latest version of the LabQuest software. Versions 1.1.1 and newer include updates specifically to fix problems with LabQuests freezing. To update your LabQuest, see    https://www.vernier.com/downloads/origin...
The standard hole size in regular stoppers is larger than the diameter of the Stainless Steel Temperature Probe. One solution is to drill your own holes in a solid rubber stopper. Use a drill bit with the same diameter as the Temperature Probe for a ...
It is almost never necessary for someone using a Go!Temp to calibrate it. Each device is carefully calibrated as part of the manufacturing process, and they are very accurate and repeatable. If you really want to calibrate, you can. There are two p...
The simple harmonic motion experiment (activity 15) in Physics with Vernier (PWV) is best done with a spring such as the Eisco Harmonic Motion Spring. Fisher is one vendor for this spring.
This spring, a truncated cone shape rather than a strai...
There is a known problem with the software included on the CD included with the Quickcam 5000. Some of the Quickcam software components will crash and then restart, only to crash again.
The solution is to update to the current drivers for the 500...
All you need is Logger Pro. Just connect a Voltage Probe (VP-BTA) to channel 4, click on the LabPro icon on the toolbar or choose Set Up Sensors from the Experiment menu. Click on the Voltage Probe and pull-down the menu. You will see Analog Out as t...
25-g Accelerometer (ACC-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Make sure that the line marked by the arrow on the label of the sensor is positioned properly to measure the desired acceleration.
...