There is a known problem with the software included on the CD included with the Quickcam 5000. Some of the Quickcam software components will crash and then restart, only to crash again.
The solution is to update to the current drivers for the 500...
All you need is Logger Pro. Just connect a Voltage Probe (VP-BTA) to channel 4, click on the LabPro icon on the toolbar or choose Set Up Sensors from the Experiment menu. Click on the Voltage Probe and pull-down the menu. You will see Analog Out as t...
25-g Accelerometer (ACC-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Make sure that the line marked by the arrow on the label of the sensor is positioned properly to measure the desired acceleration.
...
Stir Station (STIR)
Specifications and User Guide
TROUBLESHOOTING
-Primary Test (using C batteries): Place a 250 mL beaker, with about 100 mL of water, on the platform of the Stir Station. Place a magnetic stirring bar in the beaker of water and tur...
From Vernier
Both Vernier Video Analysis and Logger Pro 3 include prepared videos students can analyze.
Vernier Video Analysis includes 9 sample videos ready for students to analyze. In the launch window, scroll down to see all of the sample ...
This sensor is no longer available. Information is presented for reference only.
Student Radiation Monitor (SRM-BTD, discontinued)
Specifications and User Guide
Troubleshooting
Primary Test: Is the 9 V battery good? Ar...
Respiration Monitor Belt (RMB)
Specifications and User Guide
Troubleshooting
Primary Test: Is the belt properly attached to the Gas Pressure Sensor? It must be attached to a Gas Pressure Sensor (GPS-BTA).
Addition...
Some Light Sensors were produced with an incorrect sticker that labels the 3-position switch on the Light Sensor. The switch should be labeled:
Range (lux)
0-6000
0-600
0-150,000
If instead the switch is labeled with units of µS, the sticker...
Yes. If you use the LabPro Digital Adapter (DG-BTD), the ME-9259A will work with LabPro....
Yes, older non auto-ID sensors can work with EasyData. To use the older sensors you have to load special EasyData AppVar file(s) onto your calculator, then open one of the files using EasyData. The files that you need depend upon which interface (La...