Actually there are two ways of storing data with the Datamate program, both of which are described in the Datamate Guidebook, available for download from the following address: https://www.vernier.com/calc/index.html 1. Saving data in your calc...

If you find that the radiation monitor works normally, but quits working when you start using a DCU (Digital Control Unit), it is because the DCU software is taking over the digital lines and setting them up to be used for output from the LabPro inst...

There are two switch settings on our Magnetic Field Sensor: Low and High. High means high sensitivity, low means less sensitive. For experiments involving household appliances, you definitely want the High setting. When opening an experiment file in ...

When we designed ChemBio, we anticipated that most chemistry and biology teachers would want to see a live graph, so we force the program to produce a live graph, which requires time intervals longer than 0.1 s. It is possible to trick the progra...

Precision Timer is a very old program and was written back when computers had speeds of 4.77 MHz and similar. Nowadays, it is not uncommon to have machines that operate at 100's of MHz and some even at GHz speeds. When you press the Enter key to s...

The first thing you should do is make sure that the problem is not in the ULI. This can be done by swapping the ULI, cable, and power supply out one at a time. When you are sure that the ULI is fine, consider the following suggestions to determine wh...

The design of the Physics program allows you to delete subprograms which will free up space for data. ***If you are using a TI-83plus calculator, the PHYSICS program is stored on the calculator as an Application. The PHYSICS Application is stored in...

The experiment file you are working in most likely has the data column set to report values with 0 decimal places. This option can be changed by doing the following: 1) Select Column Options from the Data menu and Select the data column of interes...

The following tips for Motion Detectors apply to all of the following products: Motion Detector (MD-BTD)Go! Motion (GO-MOT)CBR 2 (CBR2)Go Direct® Motion Detector (GDX-MD) The maximum sample rate that you can use for the motion detector is ...