Go!Link (GO-LINK)
Product Overview
What sensors do not work with Go!Link?
Do Go! devices work with the LabQuest App?
Can I use Go! devices with TI-84 Plus or TI-Nspire calculators or Easy devices with computers or Chromebooks?
What are the sim...
The following calculators have TI SmartView emulator software available from Texas Instruments:
TI-83 Plus, TI-84 Plus (all models)Use TI-84 SmartView™ CE Emulator Software (TI-84EMU-SNGL1YR-ESW)
TI-Nspire and TI-Nspire CAS Handhelds (al...
To Prepare the water-soil mixture.
a. Place 50 g of Soil into a Beaker.
b. Add 100 mL of distilled water to the beaker.
c. Stir the mixture thoroughly.
d. Stir once every three minutes for 15 minutes.
e. After the final stirring, let the mixtur...
Below are links to specifications for Texas Instruments Software on the Texas Instrument web site:
TI-84 Plus CE SmartView Emulator Softwarehttps://education.ti.com/en/products/computer-software/ti-smartview-ce-for-84?category=specifications
...
In the field of education, innovation comes in many forms. Vernier supports and encourages educators to implement innovative applications of technology in science, math, and engineering education. Part of our mission is to identify, support, and prom...
Yes. These wireless adapters can work with any TI-Navigator system.
The CX wireless Wi-Fi adapters are designed to work with any TI-Navigator system. While the TI-Navigator software will remember any network adapter that has been associated wit...
Vernier Circuit Board 2 (VCB2)
Specifications and User Guide
This article is about the Vernier Circuit Board 2, introduced in late 2015. Information about the original Vernier Circuit Board can be found at Vernier Circuit Board (original model) Trou...
LEGO® Mindstorms® EV3 units are able to work with Vernier sensors using our LEGO Sensor Adapter for EV3 and NXT (order code: BTA-NXT, $39) and the EV3 "block," which can be downloaded for free at:
https://www.vernier.com/engineering/lego-ev3/ev3-...
The Vernier Sensor Block for MINDSTORMS EV3 software does not have a Zero function. You can easily create a correction in your program to effectively zero the sensor reading:
1. Determine what the sensor is reading when it should read zero. This...
The EV3 was designed to automatically identify EV3 and NXT LEGO sensors that have been connected to any of its input ports. Unfortunately, it does not have the capability at this time to auto-ID sensors from Vernier and automatically defaults to thin...