In early 2014, some KidWind kits included a 3V/200mA solar panel instead of a 2V/400mA panel. You can differentiate between the 2V/400mA and 3V/200mA solar panels by the arrangement of cells on the panel. The cells on a 2V/400mA panel are arranged 4...
This article refers to experiments using the KidWind 2V/400mA Solar Panel (KW-SP2V).
We have recommended a load resistance for each light source listed below. Note that the recommendations are based on using a single 2V/400mA Solar Panel. If you ...
The (MBOT-SKIT, discontinued) comes with the mBot and 2 add-on packs: the Variety Gizmos Add-on Pack, and the Perception Gizmos Add-on Pack. The electronic parts list is as follows:
mBot:
Ultrasonic sensor
Me line-follower sensor
IR receiver
Light ...
Yes, you can connect Vernier sensors to a LEGO NXT or EV3 (the EV3 is LEGO's newer model robot platform, the NXT is the older platform).
The NXT Sensor Adapter (BTA-NXT) allows Vernier analog (BTA) sensors to be used with the NXT or EV3.
To us...
In general, when using an energy sensor to measure the power output of a small solar panel such as the KidWind 2V/400mA Solar Panel (KW-SP2V), you will get higher power measurements with a specific resistance load compared with all other amounts of ...
This article refers to the Go Direct® Energy Sensor (GDX-NRG).
The Vernier Energy Sensor (VES-BTA) does not have a warning LED.
The warning LED (next to a triangle containing an exclamation point) is meant to come on when there is a measurable p...
This article refers to the following two sensors:
Vernier Energy Sensor (VES-BTA)
Go Direct® Energy Sensor (GDX-NRG)
The short answer is, if you don't measure using a complete circuit that includes a load, your power (and therefore energy pr...
If you purchased the Optical DO Probe prior to January 2015, the percent saturation setting has a range of 0-100%. This range can be expanded to measure between 0-300%. The process includes paying an upgrade fee and sending the probe to Vernier for a...
The preferred method to connect your Go Direct device to Python is to use your device's native Bluetooth® wireless technology.
If you do not have Bluetooth on your device or if you simply wish to use another Bluetooth radio you will need a Blueg...
Logger Pro does not attempt to interact with Parental Control settings. The application neither does anything implicitly or explicitly to enable or disable its operation on Macs with Parental Controls turned on. Vernier does not distribute Logger P...