Goniometer (GNM-BTA) Specifications and User Guide Troubleshooting Primary Test: Plug the probe into an interface and launch the data-collection software. Rotate the flexible arm of the Goniometer so it is open at 180º. ...

Exporting geotagged data to Google Maps is one mapping option in Logger Pro, but there are others. Two other mapping options are available by choosing Export from the File menu of Logger Pro: • To use with ESRI products, choose GIS Format: Choosi...

The following steps describe how to collect data, including latitude and longitude, using the LabQuest App, and display it on a map. 1. Set up the GPS receiver. • (LabQuest 2 and LabQuest 3 users) Enable the built-in GPS by choosing Sensor Setupâ€...

The default data-collection range for the Thermocouple (TCA-BTA) is set to have the best accuracy between 0°C and 900°C. There are two other settings available for data collection if you would like increased accuracy at a lower temperature or a hig...

Thermocouple (TCA-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the Thermocouple to an interface and check the accuracy of the readings for temperature in room air. They should be within 5 deg C...

When testing a pH Sensor (pH Sensor (PH-BTA), Tris-Compatible Flat pH Sensor (FPH-BTA), Go Direct® pH Sensor (GDX-PH)), it is best to place it into a known buffer solution. This allows you to see if the sensor is reading correctly (e.g., in a bu...

You can attach the Wireless Dynamics Sensor System (WDSS) to the beam of the Go Direct® Centripetal Force System (GDX-CFA). This will allow you to collect force and acceleration data. We recommend using the Go Direct® Force and Accelerati...

You may want to use a photogate (either Go Direct® Photogate (GDX-VPG) or Photogate (VPG-BTD)) to measure angular velocity of the Go Direct® Centripetal Force System (GDX-CFA) to help students gain insight into rotational motion. You can set...

The Go Direct® Centripetal Force System (GDX-CFA) requires the use of the Go Direct® Force and Acceleration Sensor (GDX-FOR) for sensor data collection. There are three primary channels that will be of use when using this sensor with the Go D...

The 3-step pulley has the following diameters: 20 mm 29 mm 48 mm Go Direct Centripetal Force Apparatus, Troubleshooting and FAQs...