RELATED ARTICLES● How do I manually calibrate my sensor in LabQuest App?● How do I calibrate a sensor in Logger Pro?
General Information
In most cases it is not necessary to calibrate sensors; however, for optimum accuracy you may choo...
Logger Pro computer software does not support Go Direct sensors. However, Go Direct sensors are supported on computers using our free Graphical Analysis app. While not as full-featured as Logger Pro, Graphical Analysis can be used to collect and anal...
Overview
Can I use Vernier sensors with Pasco interfaces (or vice versa)?
I have a PASCO product, will it work with Vernier interfaces and sensors?
Will the Motion Encoder Cart and Receiver work with a Pasco track?
How do I use the Pasco Power ampli...
No. Graphical Analysis does not support video analysis.
Instead, use Vernier Video Analysis.
Another solution for video analysis on iPad is Video Physics, a for-purchase app available in the App Store. Video Physics captures video, track an object,...
You have a couple of options.
(1) Let the software autoID the motion detector and photogate. The default experiment length will be 18 seconds. You may want a shorter experiment length, e.g. 5 seconds. If so, change it. Click the Collect button and c...
Goniometer (GNM-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Plug the probe into an interface and launch the data-collection software. Rotate the flexible arm of the Goniometer so it is open at 180º. ...
Exporting geotagged data to Google Maps is one mapping option in Logger Pro, but there are others.
Two other mapping options are available by choosing Export from the File menu of Logger Pro:
• To use with ESRI products, choose GIS Format: Choosi...
The following steps describe how to collect data, including latitude and longitude, using the LabQuest App, and display it on a map.
1. Set up the GPS receiver.
• (LabQuest 2 and LabQuest 3 users) Enable the built-in GPS by choosing Sensor Setup...
The default data-collection range for the Thermocouple (TCA-BTA) is set to have the best accuracy between 0°C and 900°C. There are two other settings available for data collection if you would like increased accuracy at a lower temperature or a hig...
Thermocouple (TCA-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Connect the Thermocouple to an interface and check the accuracy of the readings for temperature in room air. They should be within 5 deg C...