The 3-step pulley has the following diameters:
20 mm
29 mm
48 mm
Go Direct Centripetal Force Apparatus, Troubleshooting and FAQs...
The mass of the Sliding Carriage will vary from unit to unit. We massed several, and found the range to be from 48.1 to 48.6 grams. For best results we recommended massing the carriage you are using.
Go Direct Centripetal Force Apparatus, Troubles...
The Go Direct® Centripetal Force System (GDX-CFA) ships with two mass carriages. One slides on bearings and is the primary mass holder for experimenting with masses rotating on the CFA. The second mass holder is designed to be affixed to the beam...
The rotational moment of inertia for the beam of Go Direct Centripetal Force Apparatus is 0.00498 kg m^2 (calculated). This is based on SolidWorks calculation. Experimentally-derived values with Go Direct Force and Acceleration sensor attached were w...
This information pertains to the original LabQuest.
If you have LabQuest 2, see this article.If you have LabQuest 3, see this article.
Normally, the original LabQuest turns on in less than 90 seconds and displays the Meter screen (the screen th...
The LabQuest Emulator will not be able to communicate with a LabQuest over USB if a newer USB device driver has been installed by another application. The newer USB device drivers were first distributed in May, 2016 by the following products:
Logg...
LabQuest Mini (Model 2) [LQ-MINI]
User Manualhttps://www.vernier.com/manuals/lq-mini/
Original LabQuest Mini
User Manualhttps://www.vernier.com/manuals/lq-mini_20230306/
Supported Sensors (same for both models)https://www....
The only way for the Wireless Dynamics Sensor System to be used with Graphical Analysis or Graphical Analysis Pro is through data sharing from Logger Pro, LabQuest 2, or LabQuest 3.
WDSS cannot talk directly to an mobile device running iOS or Androi...
The PLTW Audiometric Test (Can You Hear Me Now) Lab Activity for Logger Pro is not automated. You will need to use a program to produce tones at different frequencies. To determine the threshold volume of a given frequency, you need to choose a frequ...
Included in the box of the LabQuest 2 is a tether to attach your stylus to the LabQuest 2. We recommend attaching the tether to the LabQuest 2 so that students dont accidentally lose the stylus.
Once you open the box and remove the LabQuest 2 you wi...