This is most likely caused by a corrupt preferences file. The location of this file is: ~/Library/Preferences/com.vernier.loggerpro.plist
Follow these steps to reset the preferences file:
Quit Logger Pro.
Go to Finder and open the Go menu....
If Logger Pro is crashing with a specific error message, check to see if the error message is listed here:Logger Pro Troubleshooting and FAQs
Most Logger Pro startup related issues are caused by bad installations. As such, the first thing to try ...
While attempting to start Logger Pro, you may encounter the following issues:
Logger Pro does not start at all.Logger Pro starts but you see a window that says: "A problem has caused the program to stop working correctly. Windows will close the p...
This information pertains to the original LabQuest.
If you have LabQuest 2, see this article.If you have LabQuest 3, see this article.
Normally, the original LabQuest turns on in less than 90 seconds and displays the Meter screen (the screen th...
This information pertains to LabQuest 2.
If you have an original LabQuest, see this article.If you have a LabQuest 3, see this article.
Normally, LabQuest 2 turns on in less than 90 seconds and displays the Meter screen (the screen that has the...
After upgrading from earlier versions sometimes you will get a message saying "The ordinal 18 could not be located in the dynamic link library VGPS_SDK.dll" when you try to launch the program.
Delete the file C:\Program Files\Vernier Software\Logger...