Stepper motors are great for projects and can easily be used with an Arduino and our Digital Control Unit (DCU-BTD). If you have a stepper motor and want to use it with the DCU, first you need to figure out how to wire it. There are two basic types o...
Yes. You must use the LabQuest 2 or LabQuest 3 interface to control a line on the Digital Control Unit with a Go Direct (GDX) sensor. Physically connect the DCU, connect the Go Direct sensor through software or USB. Program the control of the DCU in ...
On the back side of newer DCUs (Digital Control Units) are two different sockets to accept a DC power supply:
1) The smaller socket is a 3.5mm OD socket, center positive. This socket was designed to fit the standard 5-volt LabQuest® Power Supply...
YES. The CBL 2 and LabPro interfaces do support digital output and can be used with the Digital Control Unit (DCU-BTD). You can download sample Texas Instruments calculator programs for the DCU from the link below.
Calculator DCU ProgramsDownload...