Posts tagged with: LQ2

If you have a LabQuest 2 that was connected to a WPA2 Enterprise network where you enter a username/password, and either you mis-typed the username......
Continue Reading →
There are a few reasons you might want to collect data with both a Motion Encoder and a photogate at the same time. One example......
Continue Reading →
When computer networks are divided into multiple sub-networks (subnets), there are several ways of using the Connected Science System when devices are in a different......
Continue Reading →
Here are a few things to check: 1. Ensure you have compatible versions of the software installed using our installer. The minimum version of Logger......
Continue Reading →
Included in the box of the LabQuest 2 is a tether to attach your stylus to the LabQuest 2. We recommend attaching the tether to......
Continue Reading →
This information pertains to LabQuest 2. If you have an original LabQuest, see this article. To verify that a LabQuest 2 is charging, connect the......
Continue Reading →
If the LabQuest doesn’t detect a sensor when the sensor is plugged into the LabQuest this could be caused by the sensor or the LabQuest.......
Continue Reading →
LabQuest 2.8.3 • Addressed a language localization issue • Improved Go Direct sensor connection after a reboot LabQuest 2.8.2 • Support for Go Direct Sensors*......
Continue Reading →
First, make sure that your LabQuest 2 is really frozen, it may just be that the screen calibration is off, or that some parts of......
Continue Reading →
OHAUS Troubleshooting 1. Connect an OHAUS balance using the appropriate USB cable. 2. Launch the software and choose New from the File menu. The balance......
Continue Reading →