First, we need to determine if there really is mold inside the shaft of the sensor–it might be a precipitate rather than mold. To test......
It depends on the sensor. The following is a list of the common Water Quality sensors and their resistance to salt water. Temperature Probe –......
There is 0.23 g of silver metal and 0.002 mg/L AgCl in our pH sensors. These are both under the federal limits of waste disposal......
pH electrodes will NOT give accurate pH values in distilled or deionized water because distilled and deionized water do not have enough ions present for......
If a pH probe is drifting or not holding a calibration immediately after the calibration process is performed with freshly prepared, accurate standards, then there......
Generally, rinsing the electrode with distilled water after using should suffice. If the glass bulb looks dirty, you can rinse the electrode with warm water......
After removing the sensor but before screwing the cap back on the storage solution bottle, place a nickel under the cap and screw the cap......