Vernier Software and Technology
Vernier Software & Technology

Go Wireless® Link

This product is discontinued and no longer available.

Go Wireless Link

Collect and analyze data from Vernier sensors wirelessly on tablets and mobile devices.

Description

Visualize Scientific Concepts Without Being Tethered to Wires

Go Wireless Link connects Vernier LabQuest sensors with tablets and other mobile devices. Simply plug in one of over 45 compatible sensors and begin wirelessly streaming data to your iOS or Android device using our free Graphical Analysis GW app.

Rechargeable Battery Delivers “Always-Ready” Convenience

Go Wireless Link charges in just two hours and will collect data continuously for three days. You can easily monitor the battery status using the our free Graphical Analysis GW app. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience for students or teachers.

  • iOSiPad®, iPhone®, iPod touch®
  • AndroidAndroid tablets and phones
  • LabQuest 2LabQuest 2

Multi-Platform Compatibility

Collect and Analyze Data from Multiple Devices. That’s Freedom and Flexibility.

Like the sensors in our Go Wireless lineup, using the Go Wireless Link with iPad is quick and easy. Begin by downloading our free Graphical Analysis GW app.

Go Wireless Link can also be used directly with the LabQuest 2 for data collection and analysis on the LabQuest 2 itself. For advanced analysis options, connect your LabQuest 2 to a computer and export data into Logger Pro 3.

For a complete list of supported platforms, see the product requirements.

Product Images

Product image for Go Wireless® Link
Product image for Go Wireless® Link
Product image for Go Wireless® Link
Go Wireless Link Teacher Pack

Compatible Sensors

LabQuest 2LabQuest 2 and LabQuest App62 sensors

For All Supported Sensors

Supported Sensors

Compatibility Notes

  1. This interface can only collect acceleration data from one axis.
  2. Maximum data-collection rate on the interface may limit the sensor's response in collision experiments.
  3. Requires a BNC electrode
  4. Requires a Heart Rate Receiver to connect to an interface
  5. Connect this sensor via Bluetooth® for best results.
  6. Requires a Gas Pressure Sensor
  7. This interface can collect voltage data or current data but not both simultaneously. As a result, the software cannot calculate resistance and power data.
  8. This interface/software combination can only collect force data; displacement measurements are not supported.

iOSiOS and Graphical Analysis GW for iOS58 sensors

Supported Sensors

Compatibility Notes

  1. This interface can only collect acceleration data from one axis.
  2. Maximum data-collection rate on the interface may limit the sensor's response in collision experiments.
  3. Requires a BNC electrode
  4. Data collection will be in mV only. The pH calibration is not supported.
  5. Software does not support the Data Tagging feature that is typically used with this sensor.
  6. Requires an additional signal source, such as LabQuest 2 running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  7. Data can be collected using the sensor’s default calibration only.
  8. This interface can collect voltage data or current data but not both simultaneously. As a result, the software cannot calculate resistance and power data.
  9. This interface/software combination can only collect force data; displacement measurements are not supported.

AndroidAndroid and Graphical Analysis GW for Android47 sensors

Supported Sensors

Compatibility Notes

  1. This interface can only collect acceleration data from one axis.
  2. Data can be collected using the sensor’s default calibration only.
  3. Maximum data-collection rate on the interface may limit the sensor's response in collision experiments.
  4. Requires an additional signal source, such as LabQuest 2 running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  5. New Thermocouples (Model: TCA1816R3) are not supported with this software. No Software updates are planned.
  6. This interface can collect voltage data or current data but not both simultaneously. As a result, the software cannot calculate resistance and power data.
  7. This interface/software combination can only collect force data; displacement measurements are not supported.

AndroidAndroid and Google Science Journal47 sensors

For All Supported Sensors

  • In addition to having the Science Journal app installed and the Location permission enabled, you must also install Graphical Analysis GW on your Android device to use this sensor.

Supported Sensors

Compatibility Notes

  1. This interface can only collect acceleration data from one axis.
  2. Data can be collected using the sensor’s default calibration only.
  3. Maximum data-collection rate on the interface may limit the sensor's response in collision experiments.
  4. Requires an additional signal source, such as LabQuest 2 running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  5. New Thermocouples (Model: TCA1816R3) are not supported with this software. No Software updates are planned.
  6. This interface can collect voltage data or current data but not both simultaneously. As a result, the software cannot calculate resistance and power data.
  7. This interface/software combination can only collect force data; displacement measurements are not supported.

Review

“So if you have existing compatible Vernier sensors and are looking for a great way to connect them to your iOS or Android devices look no further, the Vernier Go Wireless Link is the perfect interface for getting your students collecting data with mobile devices!”

Source: Assistive Technology

Technical Specifications

  • Resolution: 12 bit
  • Battery charge time: Approximately 2 hours from discharged to fully charged
  • Maximum wireless range: 30 m unobstructed

Full technical specifications

Product Requirements

In addition to a supported sensor, Go Wireless Link also requires compatible software running on a supported device.

Supported Devices

  • iPad® (3rd generation or newer), iPad mini, and iPad Air®
  • iPhone® (4S or newer)
  • iPod touch® (5th generation)
  • LabQuest 2 (may require additional hardware)
  • Android tablets or phones with Android 4.3 or newer
    • Tablets: Nexus 7, Nexus 10, more…
    • Phones: Nexus 5, Samsung Galaxy series, more…

What’s Included

Go Wireless Link

Go Wireless Link Teacher Pack

Ordering Information

This product is discontinued and no longer available.

Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications. Product usage disclaimer »

Go to top