Search
Analog BTA Cable- Where can I find BTA and BTD connectors and sockets? – Technical ...
- Dec 14, 2009 ... ... BTA connector on one end and bare wire on the other. Breadboard Cable (Analog) (BB-BTA) — This cable has a BTA connector on one end and a ...
- https://www.vernier.com/til/818
- How do I know which color wire connects to which pin on the BTA ...
- May 4, 2022 ... Our LabQuest sensors all use BTA/BTD (British Telecom Analog/Digital) cables to connect to a Vernier interface. BTA/BTD connectors ...
- https://www.vernier.com/til/14978
- Vernier Breadboard Cables Troubleshooting and FAQs – Technical ...
- Nov 25, 2014 ... One end of the cable is either a British Telecom Analog (BTA) plug or a British Telecom Digital (BTD) plug that connects to a Vernier interface.
- https://www.vernier.com/til/3332
- How do I replace the cable on an original style Force Plate ...
- Jan 19, 2022 ... If the cable is damaged on a Force Plate, it can be replaced with an Analog BTA Cable (CB-BTA). The following YouTube video shows in detail what is required.
- https://www.vernier.com/til/14198
- Vernier Wired Sensor Pinouts – Technical Information Library
- Jan 31, 2020 ... Pin 6 = 0-5 Volt – Sensor Output. Resources. Analog Protoboard Adapter (BTA-ELV); Breadboard Cable (Analog) (BB-BTA); Can I use Vernier LabQuest ...
- https://www.vernier.com/til/5457
- How do I use my homemade sensor with Logger Pro? – Technical ...
- Nov 11, 2014 ... The Vernier Breadboard Cables (Breadboard Cable (Analog) (BB-BTA) ... Analog Breadboard Cable. Analog Voltage: +/-10 V, Connect the sensor ...
- https://www.vernier.com/til/3334
- How can I update to new Vernier equipment and still make use of my ...
- Jul 9, 2019 ... Analog sensors with BTA connectors need to connect to computers and Chromebooks though an interface (see below). Mobile Devices (phones and ...
- https://www.vernier.com/til/1961
- My school is moving to Chromebooks. Will the probeware I already ...
- Jul 9, 2019 ... Analog sensors with BTA connectors need to connect to the Chromebook though an interface (see below). Yes, Digital sensors with BTDÂ ...
- https://www.vernier.com/til/2871
- Can I drive the Power Amplifier using Logger Pro? – Technical ...
- May 4, 2022 ... Power Amplifier connected via the BTA cable to CH 4 of a LabPro. LabPro sensors dialog with the analog output controls. * If you enable user ...
- https://www.vernier.com/til/14956
- Do any of your sensors require special storage?
- Yes, there are a few sensors that need to be stored properly in order to stay in good condition. Oxygen Gas Sensors should be stored...
- https://www.vernier.com/til/1060/
- Can I use older sensors with interfaces that have BTA and BTD ports?
- In general, older sensors from ULIs and Serial Boxes can be used with new interfaces using an adapter. The newer style sensors have a feature...
- https://www.vernier.com/til/661/
- Why do I get no photogate data when also using an analog sensor?
- This limitation only affects LabPro. LabQuest platforms and interfaces (all models) are unaffected. A photogate and an analog sensor such as a force sensor are...
- https://www.vernier.com/til/1596/
- How do I use the Power Amplifier current sensor at the same time as LabPro analog out?
- The current sensor function of the can be used at the same time as the analog out function of LabPro, but the procedure is not...
- https://www.vernier.com/til/2160/
- If a lab activity is written for a Vernier Energy Sensor and I don't have one, can I still do the lab?
- Experiments that are written for the or the can be performed with standalone voltage and current probes, but you will need to set up the...
- https://www.vernier.com/til/3184/
- Can I use Vernier LabQuest sensors with non-Vernier software or interfaces?
- Vernier LabQuest sensors – those with order codes ending in -BTA and -BTD – are designed to be used with Vernier interfaces and software. When...
- https://www.vernier.com/til/1952/
- Can I get analog output from a LabQuest?
- Yes. LabQuest is capable of putting out an analog output signal to the audio out connector. The miniature stereo connector is located on the left...
- https://www.vernier.com/til/1837/
- How should I wrap my sensor cable?
- Some of our sensors include a cable or cord, and it is tempting to wrap it around the sensor for storage. In a short time,...
- https://www.vernier.com/til/2377/
- How do I use the function generator and analog output feature of LabPro?
- All you need is Logger Pro. Just connect a Voltage Probe (VP-BTA) to channel 4, click on the LabPro icon on the toolbar or choose...
- https://www.vernier.com/til/1821/
SAVE/SHARE YOUR CART