Did you mean "LabQuest 2 Charging Station Power Supply"

1. • What (replacement) power supply should I buy for my interface or ...
   • Sep 25, 2020 ... However, using this power supply will not charge the battery of the LabQuest 3.) LabQuest 2 (LABQ2) and LabQuest (LABQ) can be powered with ...
   • https://www.vernier.com/til/9618
2. • My LabQuest 2 or LabQuest 3 won't turn on and the screen stays ...
   • Sep 19, 2015 ... ... power and it will need to come in for repairs. (LabQuest 2 units may still charge in a charge station through the serial port.) Try swapping ...
   • https://www.vernier.com/til/3507
3. • What LabQuest 2 accessories can I use with LabQuest 3 ...
   • Aug 22, 2020 ... LabQuest International Power Supply (LQ-PS-INTL, discontinued) ... LabQuest 2 Charge Station (LQ2-CRG); Vernier Lanyard (LQ-LAN)—use ...
   • https://www.vernier.com/til/8442
4. • Why does LabQuest 2 screen flash white, and then black, when I ...
   • Mar 22, 2017 ... Note: You cannot use a charging station to fix this issue. a. Remove the battery and disconnect the AC power adapter. b. Wait 1 minute. (Verify ...
   • https://www.vernier.com/til/3031
5. • LabQuest 2 Update FAQs – Technical Information Library
   • Aug 8, 2022 ... Can I update my LabQuest 2 using the LabQuest Charging Station instead of an AC adapter? Yes, however when using a Micro SD card, you must ...
   • https://www.vernier.com/til/15625
6. • LabQuest 3 FAQs – Technical Information Library
   • Aug 12, 2020 ... Top FAQs · How does LabQuest 3 compare to LabQuest 2? · Which gestures work with LabQuest 3 touch screen? · Do you have a Charge Station for ...
   • https://www.vernier.com/til/8364
7. • LabQuest Stream Battery Troubleshooting and FAQ – Technical ...
   • May 19, 2016 ... LabQuest® 2, LabQuest ... A: Approximately 8 hours from discharged to fully charged using the power adapter or LabQuest Charging Station.
   • https://www.vernier.com/til/3671
8. • LabQuest 2 Battery Troubleshooting and FAQs – Technical ...
   • May 27, 2016 ... Connect the AC power adapter. e. Press the power button to power on ... Let the battery charge for 12 hours. 4. Run a battery test. If ...
   • https://www.vernier.com/til/2741
9. • How does LabQuest 3 compare to LabQuest 2? – Technical ...
   • Aug 19, 2020 ... Ports no longer on LabQuest 3. SD card slot; Audio In (microphone) port; Charging station / Serial port ... Higher current AC adapter (2500 vs.
   • https://www.vernier.com/til/8373
10. • Go Direct Current Probe Troubleshooting and FAQs – Technical ...
    • Sep 22, 2017 ... Troubleshooting · Connect the probe's wire leads to a DC supply in series with a known resistance. · Use a voltage probe or voltmeter to measure ...
    • https://www.vernier.com/til/4060
11. • Go Direct Static Charge Sensor Troubleshooting and FAQs
    • [Product GDX-Q] Specifications and User Guide Troubleshooting General: Press the power button on the sensor to turn it on. Connect your sensor as described in...
    • https://www.vernier.com/til/9652/
12. • How do you use the current and voltage controls of the Extech Power supply?
    • The can operate in either voltage-control or current-control modes, and so has both current and voltage control knobs. Most instructors are familiar with power supplies...
    • https://www.vernier.com/til/1825/
13. • Davis Instruments Troubleshooting and FAQs
    • As of January 2025 Vernier Science Education no longer sells Davis Instruments products. For help with Davis Instrument products see below: Davis Support Web Page:...
    • https://www.vernier.com/til/2515/
14. • What do the LED lights on the LabQuest Charging Station signify?
    • The LabQuest Charging Station contains an LED light by each of the 4 charging ports. An LED light glows if current flowing to the port...
    • https://www.vernier.com/til/2728/
15. • How can I check to see if my Power Amplifier power supply is working?
    • The power supply for the Power Amplifier is an unusual double power supply. If you look at the connector which plugs into the Power Amplifier,...
    • https://www.vernier.com/til/3938/
16. • My LabQuest 3 does not charge or hold a charge, what should I do?
    • If you think your LabQuest 3 units are not charging or not holding a charge, here are some troubleshooting steps to see if you have...
    • https://www.vernier.com/til/19260/
17. • How can I tell if my LabQuest power adapter is good?
    • Here are several ways to determine if you LabQuest power adapter is functioning. 1) Check to see that the LabQuest battery icon shows that the...
    • https://www.vernier.com/til/4247/
18. • Will my LabQuest Charging Station also work with the LabQuest 2 and LabQuest Stream?
    • This information pertains to the original LabQuest and LabQuest 2. If you have LabQuest 3, see this article. As of April 2012, are shipping with...
    • https://www.vernier.com/til/2634/
19. • What types of activities can I perform with the Charge Sensor?
    • See the article “Electrostatics with Computer-Interfaced Charge Sensors” by Robert Morse in The Physics Teacher, vol 44, November 2006, pages 498-502. This short article is...
    • https://www.vernier.com/til/1385/
20. • Melt Station Troubleshooting and FAQs
    • Specifications and User Guide Troubleshooting Additional Troubleshooting Specifications Calibration Calibrate? No. The temperature sensor embedded in the aluminum heating block of the Melt Station will...
    • https://www.vernier.com/til/2321/