Search
Optical DO Probe Replacement Cap- How do I replace a cap on the Go Direct Optical Dissolved Oxygen ...
- Put the probe in a beaker of distilled water for at least one hour. Put distilled water in the ODO storage bottle so that it covers the sponge at the bottom. ( ...
- https://www.vernier.com/til/4434
- When does the Optical DO Probe cap need to be replaced?
- If you start to notice a reduced or slow response, it is probably time to replace the cap. RELATED VERNIER PRODUCTS Optical DO Probe Replacement Cap (ODO-CAP)
- https://www.vernier.com/til/2997
- Go Direct Optical Dissolved Oxygen Probe Troubleshooting and FAQs
- Nov 11, 2019 ... To do a reset, follow the instructions below. Fill the storage bottle to the top of the sponge with distilled water. Insert the probe into the ...
- https://www.vernier.com/til/4227
- How do I reset the calibration on the Optical DO Probe?
- Dec 3, 2015 ... This article is for the Wired (BTA) Optical DO Probe. For the Go Direct Optical Dissolved Oxygen Probe, see How do I replace a cap on the Go Direct Optical ...
- https://www.vernier.com/til/3345
- Optical DO Probe Troubleshooting and FAQs
- Dec 19, 2019 ... The Optical DO Probe and sensor cap are factory calibrated and a calibration code specific to each individual cap is determined during the manufacturing ...
- https://www.vernier.com/til/2988
- How should I store Vernier products during the summer?
- May 15, 2018 ... The storage solution should be refreshed periodically, and replacement solution can be purchased, if needed. ... sensor electrode and cap. Optical ...
- https://www.vernier.com/til/3686
- Go Direct PAR Troubleshooting and FAQs
- Primary Test: Make sure that the sensor detects sunlight. Values for a bright sunny summer day should approach 2500 µmol m‾²s‾¹ of photosynthetic photon flux.
- https://www.vernier.com/til/17351
- Go Direct Rotary Motion Troubleshooting and FAQs
- Feb 12, 2019 ... Primary Test: Rotate the axle to verify that the sensor readout changes as expected (i.e., one full revolution is approximately ±6.28 radians).
- https://www.vernier.com/til/4051
- Rotary Motion Sensor Troubleshooting and FAQs
- Sep 12, 2017 ... The reading should advance from zero to approximately 6.28 radians. Note: If you are using a LabPro interface, open the Rotary Motion Angular.
- https://www.vernier.com/til/1439
- Go Direct SpectroVis Plus Troubleshooting and FAQs
- Jun 10, 2019 ... Do you sell replacement lids for your plastic cuvettes? What types ... Does the Vernier Spectrophotometer Optical Fiber work with any of the Ocean ...
- https://www.vernier.com/til/3847
- Which optical fiber cable is used with which spectrometer?
- A summary all the fiber optic cables and the spectrometers with which they can be used is found at https://www.vernier.com/til/6290.
- https://www.vernier.com/til/3927/
- Can DO values be corrected for salinity after the fact by applying salinity correction factors?
- Yes, salinity correction factors can be calculated by using the USGS DOTABLES program at http://water.usgs.gov/software/DOTABLES/ Refer to part C. If the Optical DO Probe or...
- https://www.vernier.com/til/3059/
- How do I measure bacterial, yeast, or algal growth? Do you have a spectrometer to measure OD 600?
- You can use a spectrometer to measure bacterial, yeast or algal cell growth. This is typically done by taking a sample from a liquid culture...
- https://www.vernier.com/til/18306/
- What do I do if my Optical DO storage cap is broken?
- A crack at the end of the clear storage cap (where the sponge is located) does not affect the functionality of the Vernier Optical DO...
- https://www.vernier.com/til/3094/
- What is the difference between the white storage bottle in the Optical DO Probe video and the clear bottle I received?
- The clear storage bottle containing the damp yellow sponge provides better protection for the probe during storage. Remove the entire bottle to use the Optical...
- https://www.vernier.com/til/3064/
SAVE/SHARE YOUR CART