Update on September 23, 2013: Developer access has now been provided for Windows 8.1 RTM (Release To Manufacturing). Most recent testing with the RTM shows no bluescreen during installation.
Installing Logger Pro 3.8.6.1 installs a driver that c...
We do not carry a clamp designed specifically for clamping the ultra pulley to the edge of a table or lab bench.
Since the parts are standard sizes, it is possible to use the Motion Detector Clamp Motion Detector Clamp (MD-CLAMP) to clamp the ultr...
The Photogate supports two configurations of the Ultra Pulley. The most common is to place a string in the groove of the pulley, as in Atwood's Machine experiments. For this configuration, set the Photogate distance calibration to In Groove.
On th...
This answer is for Windows and not macOS. (For macOS, the files are stored in the same folder as the Logger Pro "cmbl" sample movie file.)
Logger Pro is set by default to use the installed sample video files when the corresponding Logger Pro file...
UVA Sensor (UVA-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Are you using the UVA Sensor to check UVB light? Confirm that the sensor is appropriate for the experiment.
Secondary Test: Take readings...
Plastic Cuvettes (Visible Range) (CUV)Plastic Cuvettes (4 sided - Clear) (CUV-4S)
These are disposable cuvettes we sell for our colorimeters and [visible light] spectrophotometers. They are made of polystyrene, which can be damaged by many differ...
The Lego Digital Designer (LDD) software automatically updates itself every time you open it. Somewhere around v 3.0 Lego changed the definitions of some of the bricks and beams in the model, particularly the defined error tolerances. As a result, if...
To use the internal sensors on the WDSS to make rotational physics measurements, it is important to know exactly where the accelerometer is located inside the unit.
If the unit is face up, the sensor is located 53 mm from the edge with the force s...
To use the internal sensors on the LabQuest 2 to make rotational physics measurements, it's important to know where the accelerometer itself is located inside the unit.
If the unit is face up the sensor is located 72mm from the docking connector a...
First, we need to determine if there really is mold inside the shaft of the sensor--it might be a precipitate rather than mold. To test this, place the sensor in ~150 mL of warm water and let it sit in the warm water for 15-20 minutes. If the amount ...