The Digital Control Unit (DCU-BTD) can be used with any DC electronic component or output device that requires only power and ground connections, such as an LED, buzzer, or fan. Take care to match the DCU power supply to the output devices. For inst...
The maximum number of wireless devices the LabQuest App can support is three of any one type of device, up to a total of six devices. (LabQuest App version 2.8.2 or newer is required.)
Go Direct SensorsYou can connect up to three Go Direct sens...
LabQuest 2.8.3
• Addressed a language localization issue
• Improved Go Direct sensor connection after a reboot
LabQuest 2.8.2
• Support for Go Direct Sensors* via Bluetooth (three sensors maximum)
• Default data rates are no longer...
Go Direct® Energy Sensor (GDX-NRG)
Specifications and User Guide
Troubleshooting
General Test: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for yo...
You will find two sets of letter number pairs separated by a colon in the bottom right hand corner on the bottom label of the SpectroVis Plus (SVIS-PL, discontinued).
The letter and number pairs correspond to the firmware and hardware revision of the...
Instructors, sign in to your Vernier web account at https://www.vernier.com/account/. This will take you to the My Downloads page of your account. If you are already logged in, hover over My Account in the upper-right corner of any page on our we...
Go Direct® Radiation Monitor (GDX-RAD)
Specifications and User Guide
Troubleshooting
General: Connect your sensor as described in the Getting Started instructions for your device. Verify that the Radiation Monitor is autom...
Logger Pro 3 is no longer sold and will no longer receive updates.To use this feature, you must already own a Logger Pro license.Logger Pro v3.16.2 if the final release of Logger Pro.
The purchase of Logger Pro 3 software includes a site license ...
You will need the larger attachment screw included with the Dynamics Cart and Track System Fasteners for Force Sensor and Accelerometer (DTS-ACC) or the one included with Dynamics Cart and Track System (DTS).
See the photos below for the correct ...
The Power Amplifier (PAMP) is designed to amplify output both AC and DC signals from a LabQuest. If you find that you cannot get a DC output voltage from the Power Amplifier, try the following:
1) Investigate the signal generator. If you are using a...