If you are in an area where Wi-Fi is unavailable or unreliable, it is possible to use LabQuest Viewer to connect to LabQuest 2 or LabQuest 3 via USB. This is a useful way to display the LabQuest screen for a class demonstration. The instructions b...
If you teach analytical chemistry, you will find numerous Vernier labs and products that can fit nicely into your curriculum. Also see https://www.vernier.com/products/packages/analytical-chemistry/
Topics and Techniques
The following informat...
Are you packing up your Vernier equipment for storage over the summer? Here are some tips to ensure proper storage over a long break.
Go Direct Products
Do not leave them charging - better to leave them in a static state rather than charging. If...
There is nothing hazardous in any of the the tubes, except a tiny bit of a gas. Some of them are inert gases; others are not harmful. The quantities are small. In the case of the hydrogen tube, we do not think it is enough to be dangerous.
Dispose...
MATLAB is a programming platform that uses a a matrix-based language designed specifically for engineers and scientists in academia and industry. Common uses are for analyzing data, developing algorithms, and creating models.
Vernier sensors can be ...
Vernier Flash Photolysis Spectrometer (VSP-FP)
The current Vernier Flash Photolysis Spectrometer started shipping in April 2021 (serial number 63 and above). The complete reference manual, free experiments, and free software are available online at ...
No. The 10 mm LEDs sold with the KidWind Power Output Pack (KW-POP) are not resistor protected.
LEDs typically need a resistor to prevent damage from current that is too high. Optimal current for 3, 5, and 10 mm LEDs is usually 20 mA. Going over ...
If you teach physical chemistry, you will find numerous Vernier labs and products that can fit nicely into your curriculum.
Topics and Techniques
The following information lists common experiments performed in Physical Chemistry labs and the relevant...
The Motion Detector Bracket (DTS-MDB) includes two thumb screws and a permanently attached pin. To attach it to the Vernier Dynamics System track, follow these steps:
Remove the thumb screw closest to the pin.
Align the pin with the hole in the bac...
Newer version of Logger Pro and Logger Lite use the WinUSB driver. If you are running Logger Pro 3.11 or newer with original LabQuest or LabQuest Mini, or Logger Pro 3.12 or higher with LabPro, you need to be on the WinUSB driver. For details see Ar...