Vernier Flash Photolysis Spectrometer (VSP-FP)
The current Vernier Flash Photolysis Spectrometer started shipping in April 2021 (serial number 63 and above). The complete reference manual, free experiments, and free software are available online at ...
No. The 10 mm LEDs sold with the KidWind Power Output Pack (KW-POP) are not resistor protected.
LEDs typically need a resistor to prevent damage from current that is too high. Optimal current for 3, 5, and 10 mm LEDs is usually 20 mA. Going over ...
If you teach physical chemistry, you will find numerous Vernier labs and products that can fit nicely into your curriculum.
Topics and Techniques
The following information lists common experiments performed in Physical Chemistry labs and the relevant...
The Motion Detector Bracket (DTS-MDB) includes two thumb screws and a permanently attached pin. To attach it to the Vernier Dynamics System track, follow these steps:
Remove the thumb screw closest to the pin.
Align the pin with the hole in the bac...
Newer version of Logger Pro and Logger Lite use the WinUSB driver. If you are running Logger Pro 3.11 or newer with original LabQuest or LabQuest Mini, or Logger Pro 3.12 or higher with LabPro, you need to be on the WinUSB driver. For details see Ar...
In April of 2018, it was determined that switches SW1 and SW4 pose a safety hazard.
Affected products: All Vernier Circuit Board 2 (VCB2), shipped prior to April 11, 2018 with the mark VCB2 REV 1 PPRL 2015and the mark...
The process set up with PLTW is that teachers order our equipment through PLTW and we "drop ship" directly to the school/teacher.
PLTW schools purchasing items for PLTW courses should order through their myPLTW web portal. There is an online order s...
The Go Direct® Acceleration Sensor (GDX-ACC) comes with the following accessories to attach the sensor to our carts and other equipment.
Shim plate for cart
U-bracket for cart (labeled A)
Cylinder/tube mounting plate (labeled A)
Th...
Donors Choose, http://www.donorschoose.org/, is an online charity that connects teachers to people who are willing to donate money or equipment for projects specified by the teachers.
In order to purchase specific equipment, the company needs to be ...
mBot ships with both a 3.7-V rechargeable lithium battery and a 4-AA battery holder. In most cases, these are the best power supplies to use with mBot.
However, mBot will work with any 3.7 to 6 V DC power supply with the right connector and the c...