This article refers to KidWind Power Output Pack (KW-POP)
The KidWind Power Output Pack (KW-POP) no longer contains 10 mm LEDs. When those LEDs were included, no, the 10 mm LEDs were not resistor protected.
Since 2020, the KidWind Power Output Pack...
If you teach physical chemistry, you will find numerous Vernier labs and products that can fit nicely into your curriculum.
Topics and Techniques
The following information lists common experiments performed in Physical Chemistry labs and the relevant...
The Motion Detector Bracket (DTS-MDB) includes two thumb screws and a permanently attached pin. To attach it to the Vernier Dynamics System track, follow these steps:
Remove the thumb screw closest to the pin.
Align the pin with the hole in the bac...
Newer version of Logger Pro and Logger Lite use the WinUSB driver. If you are running Logger Pro 3.11 or newer with original LabQuest or LabQuest Mini, or Logger Pro 3.12 or higher with LabPro, you need to be on the WinUSB driver. For details see Ar...
In April of 2018, it was determined that switches SW1 and SW4 pose a safety hazard.
Affected products: All Vernier Circuit Board 2 (VCB2), shipped prior to April 11, 2018 with the mark VCB2 REV 1 PPRL 2015and the mark...
The process set up with PLTW is that teachers order our equipment through PLTW and we "drop ship" directly to the school/teacher.
PLTW schools purchasing items for PLTW courses should order through their myPLTW web portal. There is an online order s...
The Go Direct® Acceleration Sensor (GDX-ACC) comes with the following accessories to attach the sensor to our carts and other equipment.
Shim plate for cart
U-bracket for cart (labeled A)
Cylinder/tube mounting plate (labeled A)
Th...
Donors Choose, http://www.donorschoose.org/, is an online charity that connects teachers to people who are willing to donate money or equipment for projects specified by the teachers.
In order to purchase specific equipment, the company needs to be ...
mBot ships with both a 3.7-V rechargeable lithium battery and a 4-AA battery holder. In most cases, these are the best power supplies to use with mBot.
However, mBot will work with any 3.7 to 6 V DC power supply with the right connector and the c...
First, make sure that your LabQuest 2 is really frozen, it may just be that the screen calibration is off, or that some parts of the screen are not responding.Why is my LabQuest 2 screen unresponsive or acting like I am tapping on the wrong spot?
...