This information pertains to LabQuest 2.
If you have a LabQuest 3, see this article.
If you have an original LabQuest, see this article.
If your LabQuest 2 partially turns on but doesn't load the LabQuest 2 app all the way, it is possible to recov...
Many instructors use Vernier equipment as part of the International Baccalaureate (IB) program. Correlations between Vernier lab activities and the IB curriculum are available at:
https://www.vernier.com/ib-correlations/
FAQs when using Vernier prod...
A JavaScript error, like the one shown below, is caused by a corrupt or missing x86 Microsoft Visual C++ redistributable file. Having an x64 redistributable is not and can not be a substitute for the x86 version. Graphical Analysis, Spectral Analysi...
There are two sets of mounting holes on the Vernier wired (BTA) accelerometers for attaching the accelerometer firmly to an experiment setup, when necessary. Each pair of mounting holes is 30 mm apart (measured center-to-center). Each mounting hole ...
Go Direct® Force and Acceleration Sensor (GDX-FOR)
Specifications and User Guide
Troubleshooting
General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instruct...
Logger Pro 3.10.1, released in September 2015, contains the new feature of weighted curve fits. This is an advanced feature, and is not needed for basic analysis.
To use this feature, create an additional column that will contain the direct weigh...
Ocean Optics Absorbance and Emission Spectrometers (discontinued)
Ocean Optics spectrometers are not compatible with Spectral Analysis.
VERNIER SPECTROMETER (V-SPEC)
Specifications and User Guide
RED TIDE VIS-NIR SPECTROMETER (SP...
Vernier Energy Sensor (VES-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Connect either voltage or current lead to an interface and launch the data collection software. Vernier Energy Sensor should appear a...
Error 77 message is caused by the username/password being rejected for some reason.
You can only get this error message if you are running a version of LabQuest less than 2.7. It can be caused by using the wrong username/password, but it is most ...
When you setup a LabQuest to send e-mail, (Home|Connections|Email,) and press the test button, it will send a test e-mail from the LabQuest to the "From" address. If it goes well, it will report "Message sent successfully" but if there is a problem...