Nominal values for gain settings (+/- 5%) 0 - 20mV slope 150.70 x intercept 0 0 - 200mV slope 15.97 x intercept 0 0 - 1V slope 3.24 x intercept 0 -20mV to 20 mV slope 75.85 x intercept -0.024V -200mV to 200mV slope 8.48 x ...

Because pH calibrations will drift over time, periodically creating a new custom calibration provides more accurate readings. Vernier pH sensors have the ability to create a custom calibration and store it in the sensor's memory. By default, this sto...

This information pertains to LabQuest 2 and LabQuest 3. If you have an original LabQuest, see this article. The clock on the LabQuest 2 and LabQuest 3 can be synced from a variety of sources, including your computer (via Logger Pro or Logger Li...

Go Direct® ORP Sensor (GDX-ORP) Specifications and User Guide Troubleshooting General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for your devic...

We do not maintain a list of chemicals specifically damaging to the sensing unit. It is not designed to come into contact with liquids. We assume that aqueous solutions will not be allowed to enter the sensor and that discretion would be used whe...

Go Direct® Constant Current System (GDX-CCS) Specifications and User Guide Troubleshooting Primary Test: Connect the AC power adapter to the Constant Current System. Connect your sensor as described in the Getting...

Constant Current System (CCS-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the Constant Current System to the interface. Connect the AC power adapter. (Included, but the same as LabQuest® Po...

If you're having trouble separating the pH probe from the BNC connector, you're not alone — BNC (Bayonet Neill–Concelman) connectors can be confusing if you’ve never used one before. Here’s how to disconnect it safely and correctly. Appli...

Here are some things you might try prior to contacting Texas Instruments: Adjust the contrast as it may be set too low.To adjust the contrast, alternately press and release the appropriate function key and contrast-control key. TI-83/84 Plu...

The standard Conductivity Probe (CON-BTA) has a body made of ABS plastic. The temperature element itself is housed in a stainless steel tube. The sensing element is tin and copper portions in a graphite base. The Go Direct® Conductivity Probe (G...