Yes, we do. Our white paper presents research-based evidence supporting the value of probeware as part of effective science instruction.
To obtain your copy, visit https://www.vernier.com/forms/whitepaper/...
When a dynamics track sits unused for a summer or a semester, it may become dusty, depending on how it is stored. Or, a semester of student use may make a track somewhat grimy or gritty. If a track is dirty, it is a good idea to clean it before doing...
One experimental set up that is popular for studying Newton's Second Law is the Half-Atwood machine. In a Half-Atwood machine, a dynamics cart is tied off to a mass hanging over a pulley. As the hanging mass is released, the cart is accelerated down ...
LabQuest 2 and LabQuest 3 have a rudimentary security feature meant to deter unwanted access to the connections settings. To regain full access to the connections settings do the following:
Access the Advanced Preferences Network tab
• LabQuest 2...
The Tris-Compatible Flat pH Sensor (FPH-BTA) is more durable than the regular pH sensor, but it still needs to be handled with some care. Both sensors have glass parts that can be broken. The regular pH sensor has a hand blown globe-shaped tip, and ...
Barometer (BAR-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: The Barometer measures pressure in a very small range around sea level atmospheric pressure. Make sure that the Barometer is not in a situation ...
If the reading of a Stainless Steel Temperature Probe (TMP-BTA) or Surface Temperature Sensor (STS-BTA) never changes or gives erroneous readings, it is probably damaged and can not be repaired. Often a damaged sensor reads -273 degrees C or a value ...
Vernier GPS Sensor (VGPS, discontinued)
Specifications and User Guide
Troubleshooting
- Primary Test: Make sure your software and computer operating systems (as applicable) are supported by the Vernier GPS (see requirements below). Connect the Verni...
This information pertains to LabQuest 2.
If you have LabQuest 3, see this article.
If you have an original LabQuest, see this article.
We generally recommend that all LabQuest users update to the newest versions as they become available. The upd...
The pH Buffer Capsule Kit (PH-BUFCAP) (formerly order code PHB) contains two of the three items you'll need to prepare the electrode storage solution for our pH Sensors.
To prepare the proper solution to use as the storage solution for our pH Sensors...