Below is a table that compares the different features of our LabQuest interfaces:
LabQuest 2 (LABQ2)
LabQuest 3 (LABQ3)
LabQuest Stream (LQ-STREAM)
(discontinued)
LabQuest Mini (LQ-MINI)
Recommended when:
Computers, Chromebooks, and tablets...
To store LabQuest units over the summer, shut them down and store them disconnected from a charger. To fully shut down a LabQuest, follow these instructions:
• LabQuest 2 or LabQuest 3—press and hold the power button until the Shutdown message is...
While you cannot use the LabQuest Mini or LabQuest Stream to drive the Power Amplifier directly, you can use these interfaces to monitor the internal current of the Power Amplifier.
Options for driving the Power Amplifier when using these interfa...
This sensor is no longer available. Information is presented for reference only.
Digital Radiation Monitor (DRM-BTD, discontinued)
Specifications and User Guide
Extended User Manual
Troubleshooting
Primary Test:...
If the LabQuest battery has been used heavily or subjected to very high or low temperatures (such as being left in a hot or cold automobile), it may discharge quickly, even after being fully charged. It is possible for this use to permanently diminis...
Yes. The old Current and Voltage System consists of two current sensors with 6-pin DIN connectors and two voltage probes with 6-pin connectors. These sensors connect to a box labeled "Dual-Channel Amplifier".
As long as you have the whole system, th...
Yes, the CBR 2 (CBR2) can be used with this software. Additional interface, cable, and/or adapter is required (sold separately); see details below.
Graphical Analysis—Computers and Chromebooks
Connect via USB port
Go!Motion to Computer Ca...
No. These adapters only work with the original CBL . The CBL Photogate Adapter (shown here) and CBL Dual Photogate Adapter (both of which are discontinued) connect to an analog (BTA) channel on an original CBL.
For all other TI and...
We do not recommend using our sensors for long-term data collection. They are intended for use in a classroom during a lab period. Alternative suppliers are listed at:
https://www.vernier.com/company/terms-and-conditions/industrial-providers/
There ...
Yes it will but only through Logger Pro software when connected to a computer. It will not work with LabQuest App or Graphical Analysis 4....