If your device does not support wireless sensors, this option will not appear when you create an experiment. This applies to iPad 2, which supports iOS 8, but does not support Bluetooth low energy technology required for wireless sensors. For m...

Both NODE Sensor Platform for iOS (NODE-IOS, discontinued) and NODE Sensor Platform for iOS and Android (NODE-IA, discontinued) support: iPad 3 or newer iPad Mini iPhone 4s (iOS 6 or newer) iPhone 5, 5C, 5s Additionally, NODE Sensor Platform f...

This information pertains to the original LabQuest and LabQuest 2. If you have a LabQuest 2, see this article. LabQuest supports many HP printers. For a list of known and tested HP printers, see Which printers are supported in LabQuest? We are o...

This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article. There are two ways to delete files from the original LabQuest: Option 1--Update LabQuest App and Delete A...

Follow these instructions to remove or replace a Go Wireless® 100 mAh Replacement Battery (GW-BAT-100), in your Go Wireless sensor. This procedure ONLY works for the GW-TEMP. Do not try replacing the battery in other GW products, PERMANENT DAMA...

Short answer: yes. Longer answer: it is very difficult to achieve a good separation of methanol and ethanol in our Mini GC Plus. Try this method: The mixture: equal volumes of reagent grade ethanol and methanol Mini GC profile: Start Temp 30 de...

The information that follows is for LabQuest Viewer App for iPad. If you are looking for information about the LabQuest Viewer software for Windows and Macintosh computers, see LabQuest Viewer Computer Software Troubleshooting and FAQs System Requir...

A screen shot can be used by students when creating a lab report or by instructors who want to write their own experiments. If you want to capture a screen shot of a LabQuest 2 or LabQuest 3 screen, there are several options. The easiest option is ...

Since network connections can temporarily drop due to network interruptions, the networking stack holds onto the old IP addresses of LabQuest devices for a period of time, even if LabQuest is turned off or the connection is intentionally disconnected...

The information that follows is for LabQuest Viewer software for Windows® and Macintosh® computers. If you are looking for information about the LabQuest Viewer App for iPad®, seeLabQuest Viewer App for iPad Troubleshooting and FAQs LabQuest V...