Yes. The swivel from Rotational Motion Accessory Kit (AK-RMV) can be purchased separately as Rotary Motion Sensor Replacement Swivel Mount (RMV-SWIVEL).
...
Here are some helpful tips to follow:
Use fresh spinach for photosynthesis studies. Check to make sure it is fresh and that leaves are turgid because wilted spinach will yield poor results, as will spinach that has been treated with preservative...
Some of the KidWind kits include a wooden spool to do a weight lifter activity. While Vernier does not sell wooden spools as a separate item, they are included in the following items:
KidWind Basic Wind Experiment Kit (KW-BWX)
KidWind Basic Wind ...
Yes, you can import data from individual LabQuest App files into a single Logger Pro file. Here are some ways to do that.
Option 1—from files already transferred to the computer
Transfer the desired LabQuest App (QMBL) files to a single com...
A half-Atwood machine, with a cart, string, pulley, and hanging mass, is a common Newton's Second Law and kinematics lab. If you have a pulley and photogate in this setup, you can easily collect position, velocity, and acceleration data.
Startin...
The Microphone (MCA-BTA) output signal is sent to the interface on two different lines:
1) A signal centered at 2.5 volts is on the standard 0-5V output line.
2) A signal centered at 0 volts is on the alternate +/-10V output line.
Here is a pi...
Microphone (MCA-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: The easiest sound source to use with the Microphone is a tuning fork, but you may want to investigate a human voice or a whistle, electronic...
Stainless Steel Temperature Probe (TMP-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Plug in the sensor and run the data-collection program. Hold the tip of the sensor in your hand and check for the tem...
The currently shipping sliding carriage on the Centripetal Force Apparatus (CFA) has a mass of approximately 51.0 g. This is an injection molded part so there will be some variation from unit to unit.
There is an older version of the sliding carri...
Yes, there are a few sensors that need to be stored properly in order to stay in good condition.
Oxygen Gas Sensors should be stored upright. This is easily done by storing them in the bottle in which they were shipped.
Dissolved Oxygen Probes...