Follow these steps, please.
1) Use a DIN-BTA adapter to connect your Colorimeter to Channel 1 of your LabQuest.
2) Place a blank cuvette (about 3/4 full with distilled water, or the solvent of choice) in the Colorimeter and turn the control knob to 0...
If your Colorimeter does not have a CAL button, use the instructions in the document below to calibrate your Colorimeter.
http://www2.vernier.com/til/1665/colorimeter_calibration.pdf
If you are using EasyData for data collection, Vernier can provid...
LabQuest Emulator
LabQuest Viewer
Cost for software
No Longer Available
LabQuest Viewer® (LQ-VIEW)
Available for Windows
Yes (XP [32 bit only], Vista, 7)
Yes (v:1.1: XP, Vista, 7; v:2.0: 7 SP1, 8, 8.1, 10)
Available for Mac
No
Yes (v:1....
The following are the system requirements for:
- LabQuest Viewer® (LQ-VIEW)
- LabQuest Viewer® (LQ-VIEW-E)
Version 2.0
Mac System Requirements
- OS X 10.8 and newer
- Requires approximately 5.0 MB disk storage; you should have at least 10 MB...
The Dynamics Cart and Track System with Motion Encoder (DTS-EC) can show a drift in the zero position of the cart when connected to a LabQuest when powered by certain AC adapters. This can be seen by leaving the cart stationary, and monitoring the po...
LabQuest App version 2.4 or newer (original LabQuest version 1.7 or newer) has the following calculated column equations:
X&Y are data columns; A,B,C,D are single values
X+A
X-A
AX
X/A
A/X
AX+B
AX2+BX+C
AX3+BX2+CX+D
ABX
AX^B
ABX^C
A/X^B
A/(B+X)...
To share a Vernier Video Physics project via YouTube, use the following steps.
1) Capture and analyze your movie.
2) Tap the Share button.
3) Choose either Video or Video with Points.
4) Tap Save Video.
5) Leave Video Physics and launch the Phot...
This information pertains to the original LabQuest.
If you have LabQuest 2 or LabQuest 3, see this article.
To connect an original LabQuest to a network, you need a Vernier Wi-Fi USB Adapter (WIFI-USB, discontinued).
Insert the Vernier Wi-Fi...
This information pertains to LabQuest 2 and LabQuest 3.
If you have an original LabQuest, see this article.
Follow these steps to connect a LabQuest to a Wi-Fi network.
Tap the Wi-Fi icon in the LabQuest toolbar to launch the Connections app...
Both Pasco and Vernier have made many different sensors and interfaces in the last 20 years, so there is no simple and quick answer to this question. This document is meant to answer most common questions. If you have a compatibility issue that is n...