This information pertains to the original LabQuest.
LabQuest 2 and LabQuest 3 don't have this functionality.
If you attempted a hard reset (How do I perform a hard reset on my original LabQuest unit?) and the blue light did not turn off and the un...
Breadboard Cable (Analog) (BB-BTA)
Breadboard Cable (Digital) (BB-BTD)
TROUBLESHOOTING
The Vernier Breadboard Cables are fairly simple. One end of the cable is either a British Telecom Analog (BTA) plug or a British Telecom Digital (BTD) plug that c...
To copy a graph from Logger Pro, select the graph and choose Copy from the Edit menu. In most applications, you can choose Paste from the Edit menu to insert your graph from the clipboard. With certain applications or system configurations, this may...
Go Direct® CO2 Gas Sensor (GDX-CO2)—current version
We currently sell the Go Direct CO₂ Gas sensor, which was first sold in 2018.
This sensor can connect via USB or Bluetooth. No interface is required.
Sensor User Manual
...
The film thickness of the column used in our Mini GC Plus is 1.0 µm. Other column specifications that may be helpful are shown below:
Column type: Restek MXT-1 nonpolar capillary column
Column length: 11 meters
Film thickness: 1.0 µm
Interior d...
We tested a new CPO Photogate in November 2014 using a LabQuest. This photogate worked. There are two things to note about it, however:
- It does not autoID. You have to manually identify it as a photogate.
- The cable used on this photogate could ...
YES. The CBL 2 and LabPro interfaces do support digital output and can be used with the Digital Control Unit (DCU-BTD). You can download sample Texas Instruments calculator programs for the DCU from the link below.
Calculator DCU ProgramsDownload...
After tracking an object in Video Physics, you can delete a single point, a group of points, or all points.
To delete a single point:
1. Tap on the point you want to delete.
2. Choose Delete to remove the point.
To delete a group of points:
...
The Vernier Breadboard Cables (Breadboard Cable (Analog) (BB-BTA) and Breadboard Cable (Digital) (BB-BTD)) provide an easy way to connect your sensor to a Vernier interface. Once your sensor is connected to an interface, you can use Logger Pro to c...
Here are some common issues related to auto-ID of sensors you should check before going further:
A. Some older sensors are not auto-ID capable.
If you are using older sensors with round, DIN plugs and adapters, they are incapable of auto-ID. Some ot...