Graphical Analysis app does not support sensors that don't Auto-ID.Use these sensors with LabQuest App or Logger Pro.
Generally, sensors built before we implemented the "Auto-ID" feature (~2002) require manual setup every time you use the sensor....
This information pertains to LabQuest 2 and LabQuest 3.
The original LabQuest does not support this functionality.
When trying to use the LabQuest Viewer software with a LabQuest 2 or LabQuest 3 connected via USB, a driver will be needed.
T...
Logger Pro is no longer sold and will no longer receive updates.For analysis of motion in videos use Vernier Video Analysis*.
It can be useful to create the calculated columns needed for a particular analysis in one file, then distribute a copy o...
There was an issue in 2.0.1 which caused the share button to misbehave on iOS 8. The solution is to update Video Physics to version 3.0 or newer via the App Store.
http://bit.ly/videophysics...
There are two conditions that can cause this issue with the Vernier Optical DO Probe. If you are measuring the rate of photosynthesis in the lab using an artificial light source, it could be light contamination. If you are doing a field experiment or...
If a .txt file has been exported to the internal memory of the LabQuest, the LabQuest App will not be able to open or access the file with the LabQuest App. To view the data, open or import it into Logger Pro (or Logger Lite) using the LabQuest Brow...
Probably, but it depends on contamination. As long as there is no mold growing in the DO Filling Solution, 125 mL (FS), it should still work long past the expiration date printed on the bottle. If in doubt, try it. If the probe responds, the solution...
This one of the more common forms of damage to a force sensor by a student.
What happens is that if the sensor gets hit hard, the strain gauge inside bends to one side and stays there (usually pushed in). If the sensor is working correctly the raw o...
A Wireless Dynamics Sensor System (WDSS), Wireless Dynamics Sensor System (WDSS), can be connected to a PASCO dynamics cart using the included base plate and hardware.
The plate connects to the cart using two 10-32 x 1/2" flat head screws thro...
If the calibration screen does not respond to taps as described in:
Why is my LabQuest 2 screen unresponsive or acting like I am tapping on the wrong spot?
try the following:
1) Press the escape hard key (this is the ba...